Bedienungsanleitung Stiga 107M (Seite 5 von 11) (Englisch)

608619

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

1 GENERAL

This symbol indicates WARNING. Seri-

ous personal injury and/or damage to

property may result if the instructions

are not followed carefully.

You must read these instructions for use

and the machine’s safety instructions

carefully.

1.1 Symbols

The following symbols appear on the machine.

They are there to remind you of the care and atten-

tion required in use.

This is what the symbols mean:

Warning!

Read the instruction manual and the safety

manual before using the machine.

Warning!

Do not insert your hands or feet under the

cover when the machine is in operation.

Warning!

Watch out for discarded objects. Keep on-

lookers away.

Warning!

Before starting repair work, remove the

spark plug cable from the spark plug.

1.2 References

1.2.1 Figures

The figures in these instructions for use are num-

bered 1, 2, 3, etc.

Components shown in the figures are marked A, B,

C, etc.

A reference to component E in figure 5 is written

“5:E”.

1.2.2 Headings

The headings in these instructions for use are num-

bered in accordance with the following example:

“2.3.2” is a subheading to “2.3” and is included un-

der this heading.

When referring to headings, only the number of the

heading is normally specified. E.g. “See 2.3.2”.

2 DESCRIPTION

2.1 General

The cutting deck is intended for use on Stiga’s 4-

wheel drive Park machines.

The cutting deck is supplied in one of the follow-

ing versions:

• With manual adjustment of cutting height.

• With electrical adjustment of cutting height.

2.2 Controls, 125 Combi Pro

2.2.1 Cutting height adjustment

The cutting height can be adjusted between 25 and

90 mm.

Electrical cutting height adjustment

The setting can be adjusted infinitely variably us-

ing a switch on the machine.

Manual cutting height adjustment

The setting can be adjusted to a number of fixed

positions using the lever. See fig. 1.

2.2.2 Incline forwards

The rear section of the cutting deck can be raised

12 mm by moving the two pins down one hole

from the basic setting. See fig. 2.

2.2.3 Rear mounting

The cutting deck’s rear section is secured with the

pins in fig. 2.

2.2.4 Mounting in implement lifter

The deck is mounted in the implement lifter with a

chain and snap hooks.

One snap hook is intended for the working position

and can be moved in the chain links to set the lift-

ing force.

The other snap hook is intended for the washing

position.

2.3 Controls, 107 M HD

2.3.1 Cutting height adjustment

The cutting height can be adjusted between 30 and

85 mm.

Electrical cutting height adjustment

The setting can be adjusted infinitely variably us-

ing a switch on the machine.

Manual cutting height adjustment

The setting can be adjusted to a number of fixed

positions using the lever. See fig. 9.

2.3.2 Incline forwards

The rear section of the cutting deck can be raised

12 mm by moving the two pins down one hole

from the basic setting. See fig. 13.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga 107M Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info