Bedienungsanleitung Stiga SHT 48 AE (Seite 64 von 232) (Alle Sprachen)

608498

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

■ When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a re.

■ Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

SERVICE

■ Have your power tool serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

HEDGE TRIMMER SAFETY WARNINGS

■ Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be

cut when blades are moving. Make sure the switch

is o when clearing jammed material.A moment of

inattention while operating the hedge trimmer may

result in serious personal injury.

■ Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the

hedge trimmer always t the cutting device cover.

Proper handling of the hedge trimmer will reduce

possible personal injury from the cutter blades.

■ Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring. Cutter blades contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock.

READ ALL INSTRUCTIONS BEFORE OPERATING

■ Read the instructions carefully. Be familiar with the

controls and proper use of the unit.

■ Do not operate this unit when tired, ill, or under the

inuence of alcohol, drugs, or medication.

■ Inspect the unit before use. Replace damaged parts.

■ Check for battery pack leaks.

■ Make sure all fasteners and guards are in place and

secure. Replace cutting blades or any other parts

that are cracked, chipped, or damaged. Make sure

the cutting blade is properly installed and securely

fastened. Failure to do so can result in personal injury

to the operator and bystanders, as well as damage

to the unit.

■ Use the right tool. Only use this hedge trimmer for the

purpose intended.

■ Do not use hedge trimmer if switch will not turn the

unit on or o. A unit that cannot be controlled with the

switch is dangerous and must be repaired.

■ Clear the area to be cut before each use. Remove all

objects such as cords, lights, wire, or string which can

become entangled in the cutting blade.

■ Clear the area of children, bystanders, and pets.

At a minimum, keep all children, bystanders and

pets outside a 15 m radius; there still may be a

risk to bystanders from thrown objects. If you are

approached, stop the unit immediately.

■ Do not operate power tools in explosive atmospheres,

such as in the presence of  ammable liquids, gases

or dust. Power tools create sparks which may ignite

the dust or fumes.

■ To avoid the risk of electric shock, do not operate unit

in damp or wet locations.

■ Do not handle the unit with wet hands.

■ Do not allow children or untrained individuals to use

this hedge trimmer.

■ To reduce the risk of injury, always wear full eye

protection, footwear, goggles and clothing when

using this machine.

■ Wear a face or dust mask if the operation is dusty.

■ Dress properly. Do not wear loose clothing or

jewellery; they can be caught in moving parts. Use of

rubber gloves, substantial footwear and long trousers

is recommended when working outdoors.

■ To prevent hair from being drawn into nearby air

vents and becoming entangled in moving parts, wear

protective hair covering to contain long hair or secure

covered hair above shoulder level.

■ When transporting or storing the machine always t

with blade cover.

■ Always be aware of your surroundings and stay alert

for possible hazards that you may not hear due to the

noise of the machine.

■ Form the habit of checking to see that keys and

adjusting wrenches are removed from the tool before

turning it on.

■ Always ensure all the handles and guards are tted

when using the tool.

■ Never attempt to use an incomplete machine or one

tted whith an unauthorised modication.

■ The vibration level during actual use of the power tool

can dier from the declared total value depending on

the ways in which the tool is used.

■ It has been reported that vibrations from hand-held

tools may contribute to a condition called Raynaud’s

Syndrome in certain individuals. Symptoms may

include tingling, numbness and blanching of the

ngers, usually apparent upon exposure to cold.

Hereditary factors, exposure to cold and dampness,

diet, smoking and work practices are all thought to

contribute to the development of these symptoms. It

is presently unknown what, if any, vibrations or extent

of exposure may contribute to the condition. There

are measures that can be taken by the operator to

possibly reduce the eects of vibration:

■ Keep your body warm in cold weather. When

operating the unit wear gloves to keep the hands and

wrists warm. It is reported that cold weather is a major

factor contributing to Raynaud’s Syndrome.

■ After each period of operation, exercise to increase

blood circulation.

■ Take frequent work breaks. Limit the amount of

exposure per day.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your physician

about these symptoms.

Stiga SHT 48 AE Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info