Bedienungsanleitung Stiga SHT 600 (Seite 23 von 258) (Alle Sprachen)

608750

Zoom out

Zoom in

Vorherige Seite

1/258

Nächste Seite

HOW TO START - STOP THE MOTOR /USING THE MACHINE

in order to switch the motor on and keep it running.

The motor will stop if either switch is released.

STOPPING THE MOTOR (Fig. 2)

To stop the motor:

– Release the switches (5) and (6).

– FIRST unplug the extension lead (3) from the

mains socket (4) and THEN disconnect the

power cable (2) of the machine from the exten-

sion lead (3).

DANGER! When the motor is switched o,

a few sparks may be seen near the ventilation slots;

this is perfectly normal and does not damage the

tool in any manner.

STARTING THE MOTOR (Fig. 2)

Before starting the motor:

– Fasten the extension lead (1) to the cable clamp

on the rear handgrip.

– FIRST connect the power cable plug (2) to the

extension lead (3) and THEN plug the extension

lead into the mains socket (4).

– Remove the blade protection devices.

– Make sure the blade is not touching the ground

or any other object.

– Make sure the handgrip is locked in the centre

position.

To start the motor:

1. Hold the machine rmly with both hands.

2. Press the safety switch (5) and then the switch

(6).

DANGER! Both switches must be enabled

WARNING! For your safety and that of

others:

1) Do not use the machine without having

read the instructions carefully. Become

ac quainted with the controls and the pro-

per use of the machine. Learn how to stop

the motor quickly.

2) Only use the machine for its intended

use, that is “the cutting and trimming of

hedges, consisting in plants with small sized

branches”. Any other use may be danger-

ous and severly da ma ge the machine. Ex-

amples of improper use may include, but

are not limited to:

– general grass cutting and in particular,

near kerbs;

– chopping material for composts;

– pruning;

– using the machine for cutting non-plant

material;

– use of the machine by more than one

person.

3) Residual risks: even all the safety rule

are obeyed, there still can be a certain

residual risk, which cannot be excluded.

From the kind and construction of the tool

the foreseeable potential endangerments

can be:

– Contact with the unprotected cutting

teeth.

– Involve ngers or hands into the mov-

ing cutting blade.

– Unexpected, sudden movement of the

cutting blade.

– Thrown away of chips, it may damage

your eyes.

– Damage of the hearing, if no protection

of the ears is carried.s

4) Keep in mind that the operator or user is

re sponsible for accidents or hazards oc-

curring to other people or their property.

5) Always wear suitable clothing when using

the machine. Your dealer can provide you

with all the information on the most suit-

able accident-prevention devices to guar-

antee your safety.

6) Mow only in daylight or good articial

light.

7) Thoroughly inspect the whole work area

and remove anything that could be thrown

up by the machine or damage the cutting

de vice (branches, iron wire, hidden wir-

ing, etc.).

8) Prevent the cutting device from touching

the electric cable. Use the cable clamp

6. HOW TO START - STOP THE MOTOR

7. USING THE MACHINE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga SHT 600 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info