Bedienungsanleitung Stiga SPR 255 (Seite 27 von 508) (Alle Sprachen)

608747

Zoom out

Zoom in

Vorherige Seite

1/508

Nächste Seite

WARNING!

This special type of chain-saw was designed for maintaining trees and must therefore be used

only by a trained operator using a work tool that is safe and carefully designed. This chain-saw

must be used only for maintaining trees in compliance with the above conditions. It is generally

used with two hands in the same way as a conventional chain-saw.

Some national regulations can restrict use of the machine.

INTRODUCTION 1

Dear Customer,

thank you for choosing one of our products. We hope that you will be completely satised with this

machine and that it fully meets your expectations. This manual has been compiled in order to provide

you with all the information you need to get acquainted with the machine and use it safely and e ciently.

Don’t forget that it is an integral part of the machine, so keep it handy so that it can be con sult ed when

necessary, and pass it on to a further user if you resell or loan the machine.

Your new machine has been designed and manufactured in pursuance with current regulations, and

is safe and reliable if used in compliance with the instructions provided in this manual (proper use).

Using the machine in any other way, or non-compliance with the safety specications relative to use,

maintenance and repair is considered “improper use” which will invalidate the warranty, relieve the

manufacturer from all liabilities, and the user will consequently be liable for all and any damage or injury

to himself or others.

Since improvements are periodically made to our products, you may nd slight dierences between

your machine and the descriptions contained in this manual. Certain modications can be made to the

machine without prior warning and without the obligation to update the manual, although the essential

safety and function characteristics will remain unaltered. In case of any doubts, please contact your

dealer. And now enjoy your work!

CONTENTS

1. Identication of the main components .......................................... 2

2. Symbols ........................................................................................ 3

3. Safety requirements ...................................................................... 4

4. Machine assembly ........................................................................ 9

5. Preparing to work ........................................................................ 10

6. How to start - Use - Stop the engine ........................................... 12

7. Using the machine ...................................................................... 13

8. Maintenance and storage ........................................................... 15

9. Identication of faults .................................................................. 19

10. Accessories ................................................................................ 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga SPR 255 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info