Bedienungsanleitung Stiga VILLA ROYAL (Seite 7 von 11) (Englisch)

608634

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

The towing unit must only be loaded with a verti-

cal force of max. 100 N.

The pulling force on the tow unit from towed ac-

cessories must be max. 500 N.

NOTE! Before using a trailer – contact your insur-

ance company.

NOTE! This machine is not intended to be driven

on public roads.

STARTING AND OPERATING

ENGINE CASING

The engine casing must be removed to inspect and

maintain the engine and battery. Removing:

1. Lift up the two catches on the rear edge (fig. 4).

2. First pull the engine casing backwards slightly.

Then lift it off.

Fitting:

1. Tilt the seat forward.

2. Align the casing’s top front pegs to the recesses

in the front of the engine casing (fig. 5). Do not

push the pegs in yet (see item 4 below).

3. Place the casing’s bottom pegs in the groove in

the shock absorber.

4. Guide in the two side pegs in the groove in the

front engine casing. Now press forward the

complete casing.

5. Finally, push down the two catches.

The machine must not used without the

engine casing fitted. Risk for burn inju-

ries and pinch injuries.

FILLING THE FUEL TANK

Always use clean unleaded petrol. Never use oil-

mixed 2-stroke petrol (fig. 6).

NOTE! Bear in mind that standard unleaded petrol

is perishable. Never purchase more than what you

can use within 30 days.

Environmentally-friendly petrol is a good choice

ofpetrol.This typeof petrolhasa composition that

is less hazardous for people and nature.

Petrol is highly inflammable. Store pet-

rol in specially made containers for this

purpose.

Only fill up with petrol outdoors, and

never smoke when filling. Fill up with

petrol before starting the engine. Never

remove the filler cap or fill up with pet-

rol when the engine is running or still

warm.

Never completely fill the fuel tank. Leave an emp-

ty space (= at least the entire filler tube plus 1 - 2

cm at the top of the tank) to allow the petrol to ex-

pand when it warms up without overflowing.

CHECKING THE OIL LEVEL

(Master - Senator - Comfort - Presi-

dent)

On delivery, the crankcase is filled with SAE 30 oil.

Check the oil level every time before using to

ensure that it is correct. The machine should be

standing on level ground.

Wipe clean round the oil dipstick. Release

it and pull out. Wipe, push down fully and

screw it back in.

Unscrew it and pull out again. Check the oil level.

Top up with oil to the “FULL” mark if the oil level

is below this (fig. 7).

CHECKING THE OIL LEVEL (Royal)

On delivery, the crankcase is filled with SAE oil

10W-40.

Check the oil level every time before using to

ensure that it is correct. The machine should be

standing on level ground.

Wipe clean round the oil dipstick. Release

it and pull out. Wipe, push down fully

without screwing it back in.

Pull out again and check the oil level. Top up with

oil to the “FULL” mark if the oil level is below this

(fig. 8).

SAFETY SYSTEM

This machine is equipped with a safety system that

consists of:

- a switch at the gear lever (only Master, Senator,

Comfort).

- a switch at the brake pedal (only President,

Royal).

- a switch in the seat mounting (all).

In order to start the machine, the following are nec-

essary:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga VILLA ROYAL Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info