Bedienungsanleitung Stihl 029 (Seite 68 von 90) (Englisch)

52130

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

11Chainsaw Safety Manual

English / USA

The muffler and other parts of the engine

(e.g. fins of the cylinder, spark plug)

become hot during operation and remain

hot for a while after stopping the engine.

To reduce risk of burns do not touch the

muffler and other parts while they are

hot. Don't work alone. Keep within

calling distance of others in case help is

needed.

Your chainsaw is equipped with a chain

catcher. It is designed to reduce the risk

of personal injury in the event of a

thrown or broken chain. From time to

time the catcher may be damaged or

removed.

To reduce the risk of personal injury, do

not operate a chainsaw with a damaged

or missing catcher.

Inspect buffers periodically. Replace

damaged, broken or excessively worn

buffers immediately, since they may

result in loss of control of the saw.

A "sponginess" in the feel of the saw,

increased vibration or increased

"bottoming" during normal operation

may indicate damage, breakage or

excessive wear. Buffers should always

be replaced in sets. If you have any

questions as to whether the buffers

should be replaced, consult your STIHL

servicing dealer.

!Warning!

Take extreme care in wet and freezing

weather (rain, snow, ice). Put off the

work when the weather is windy, stormy

or rainfall is heavy.

!Warning!

Avoid stumbling on obstacles such as

stumps, roots or rocks and watch out for

holes or ditches. Clear the area where

you are working. Be extremely cautious

when working on slopes or uneven

ground. There is increased danger of

slipping on freshly debarked logs.

!Warning!

To reduce the risk

of serious or fatal

injury to the

operator or

bystanders, never

use the saw with one hand.

You cannot control reactive forces and

you may lose control of the saw, which

can result in the skating or bouncing of

the bar and chain along the limb or log.

Even for those compact saws designed

for use in confined spaces, one-handed

operation is dangerous because the

operator may lose control.

Cutting Instructions

Grip: Always hold the saw firmly with

both hands when the engine is running.

Place your left hand on front handle bar

and your right hand on rear handle and

throttle trigger. Left-handers should

follow these instructions too.

Wrap your fingers tightly around the

handles, keeping the handles cradled

between your thumb and forefinger. With

your hands in this position, you can best

oppose and absorb the push, pull and

kickback forces of your saw without

losing control (see section on reactive

forces). Make sure your chainsaw

handles and grip are in good condition

and free of moisture, pitch, oil or grease.

!Warning!

Do not operate your chainsaw with the

starting throttle lock engaged. Cutting

with the starting throttle lock engaged

does not permit the operator proper

control of the saw or chain speed.

001BA087 LÄ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl 029 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info