Bedienungsanleitung Stihl 066 (Seite 18 von 54) (Englisch)

52153

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Low kickback chain

Some types of saw chain have specially

designed components to reduce the

force of nose contact kickback. STIHL

has developed low kickback chain for

your powerhead.

“Low kickback saw chain” is a chain

which has met the kickback performance

requirements of § 5.12.2.4 of

ANSI B 175.1-1991 (Safety Require-

ments for Gasoline-Powered Chain-

Saws) when tested on a selected repre-

sentative sample of chainsaws below

3.8 cubic inch displacement specified in

ANSI B 175.1-1991.

Warning!

There are potential powerhead and bar

combinations with which low kickback

saw chains can be used which have not

been specifically certified to comply with

the 45° computer derived kickback angle

of § 5.12 of ANSI B 175.1-1991.

Some low kickback chains have not

been tested with all powerhead and bar

combinations.

Warning!

A dull or improperly sharpened chain

may reduce or negate the effects of the

design features intended to reduce

kickback energy. Improper lowering or

sharpening of the depth gauges or

shaping of the cutters may increase the

chance and the potential energy of a

kickback. Always cut with a properly

sharpened chain.

Reduced kickback bar

STIHL green labeled reduced kickback

bars are designed to reduce the risk of

kickback injury when used with STIHL

green labeled low kickback chains.

Warning!

When used with other, more aggressive

chains, these bars may be less effective

in reducing kickback, and may result in

higher kickback forces.

Bow Guides

Warning!

Do not mount a bow guide on any

STIHL chainsaw.

Any chainsaw equipped with a bow

guide is potentially very dangerous.

The risk of kickback is increased with a

bow guide because of the increased

kickback contact area. Low kickback

chain will not significantly reduce the risk

of kickback injury when used on a bow

guide.

To avoid kickback

The best protection from personal injury

that may result from kickback is to avoid

kickback situations:

1. Hold the chainsaw firmly with both

hands and maintain a secure grip.

2. Be aware of the location of the guide

bar nose at all times.

3. Never let the nose of the guide bar

contact any object. Do not cut limbs

with the nose of the guide bar.

Be especially careful when cutting

small, tough limbs, small size brush

and saplings which may easily catch

the chain.

4 Don’t overreach.

5. Don’t cut above shoulder height.

6. Begin cutting and continue at full

throttle.

7. Cut only one log at a time.

8. Use extreme caution when reentering

a previous cut.

9. Do not attempt to plunge cut if you

are not experienced with these

cutting techniques.

10. Be alert for shifting of the log or other

forces that may cause the cut to

close and pinch the chain.

11. Maintain saw chain properly. Cut with

a correctly sharpened, properly

tensioned chain at all times.

12. Stand to the side of the cutting path

of the chainsaw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl 066 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info