Bedienungsanleitung Stihl BR 200 (Seite 8 von 72) (Englisch, Spanisch)

537234

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

BR 200

English

WARNING

Check fuel system for leaks, especially

the visible parts, e.g., filler cap, hose

connections, manual fuel pump (only for

power tools equipped with a manual fuel

pump). Do not start the engine if there

are leaks or damage – risk of fire! Have

the machine repaired by a servicing

dealer before using it.

WARNING

Never operate your power tool if it is

damaged, improperly adjusted or

maintained, or not completely or

securely assembled.

WARNING

Check that the spark plug boot is

securely mounted on the spark plug – a

loose boot may cause arcing that could

ignite combustible fumes and cause a

fire.

Keep the handles clean and dry at all

times; it is particularly important to keep

them free of moisture, pitch, oil, fuel mix,

grease or resin in order for you to

maintain a firm grip and properly control

your power tool.

WARNING

To reduce the risk of injury from parts

thrown by the fan wheel, check the fan

housing for damage (cracks or holes

that could allow foreign objects to

contact the fan wheel). If any such

damage is found, stop using the unit and

contact your STIHL dealer for repair.

WARNING

Adjust carrying harness to suit your size

before starting work.

In an emergency, you may slip out of the

harness and throw off the machine

quickly. Try slipping out of the harness a

number of times before using the

machine in order to become

accustomed to it. Do not throw off the

machine while practicing as it could

damage the machine.

Starting

To reduce the risk of fire and burn

injuries, start the engine at least 10 feet

(3 m) from the fueling spot, outdoors

only.

WARNING

Your power tool is a one-person

machine. To reduce the risk of eye or

other injury from thrown objects, insure

that bystanders are at least 50 feet

(15 m) away during use. Stop operation

immediately if you are approached.

WARNING

This unit is equipped with an ignition

system that is normally in operational

readiness. After the setting lever is used

to stop the engine, it automatically

springs back to the "on" position. If the

engine is warm, it may be possible to

start it by simply pulling the starter rope,

with no further adjustments. To reduce

the risk of injury, be particularly alert to

keep children away from the unit.

For specific starting instructions, see the

appropriate section of your manual.

Place the power tool on firm ground or

other solid surface in an open area.

Maintain good balance and secure

footing.

WARNING

When you pull the starter grip, do not

wrap the starter rope around your hand.

Do not let the grip snap back, but guide

the starter rope to rewind it properly.

Failure to follow this procedure may

result in injury to your hand or fingers

and may damage the starter

mechanism.

Once the engine has started,

immediately blip the throttle trigger,

which should cause the choke knob to

move to the run position and allow the

engine to slow down to idle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl BR 200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl BR 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info