537257
16
Zoom out
Zoom in
Vorherige Seite
1/98
Nächste Seite
15FS 300, FS 350, FS 400, FS 450, FS 480
English / USA
Using the grass cutting blade
All kinds of grass and weeds can be
easily cut with the grass cutting blade.
The clearing saw is swept in an arc
similar to a scythe.
!Warning!
To reduce the risk of serious or fatal
injury never attempt to cut woody
materials.
The 4-tooth grass cutting blade is
intended to cut grass and weeds. It has
4 cutting knives with cutting edges on
both sides, i.e. front and rear.
The 8-tooth grass cutting blade is
recommended for cutting fern or reed.
Both blades have to be resharpened
when all cutting edges are dull.
Using the brush knife
When fitted to the clearing saw, the
brush knife is suitable for applications
ranging from cutting matted grass to
clearing weeds, wild growth and scrub.
To cut wild growth and scrub, lower the
rotating brush knife down onto the
growth to achieve a chopping effect. Use
the clearing saw like a scythe to cut
grass, i.e. sweep it to and for in an arc.
!Warning!
When cutting woody materials, use the
left side of the blade to avoid "kickout"
(blade thrust) situations.
!Warning!
Improper use of a brush knife may cause
it to crack, chip or shatter.
Thrown parts may seriously injure the
operator or bystanders. To reduce the
risk of personal injury it is essential to
take the following precautions:
Avoid contact with hard or solid foreign
objects such as stones, rocks or pieces
of metal.
Never cut wood or shrubs with a stem
diameter of more than 2 cm (3/4") - use
a circular saw blade for such work.
Inspect the brush knife at regular short
intervals for signs of damage. Do not
continue working with a damaged brush
knife. Resharpen the brush knife
regularly (when it has dulled noticeably).
!Warning!
When cutting young saplings or other
woody materials up to 2 cm (3/4") in
diameter, use left side of the blade to
avoid "kickout" situations (see
appropriate section in this manual). Do
not attempt to cut woody material with a
larger diameter, since the blade may
catch or jerk the clearing saw forward.
This may cause damage to the blade or
clearing saw or loss of control of the
clearing saw, resulting in personal injury.
000BA020 KN
002BA066 KN
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

stihl-fs-480

Suche zurücksetzen

  • Benzinzufuhr funktioniert nicht.beim pumpen ist kein Sprit im Schaugummi! Eingereicht am 8-5-2019 17:05

    Antworten Frage melden
  • Wie wird der Faden richtig auf die Spule gewickelt. Eingereicht am 21-5-2018 17:56

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stihl FS 480 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Stihl FS 480

Stihl FS 480 Bedienungsanleitung - Deutsch - 168 seiten

Stihl FS 480 Zusatzinformation - Holländisch - 20 seiten

Stihl FS 480 Bedienungsanleitung - Holländisch, Französisch, Italienisch - 168 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info