Bedienungsanleitung Stihl FS 510 C-M (Seite 16 von 120) (Englisch, Spanisch)

537267

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

FS 510 C, FS 560 C

English

Using the Grass Cutting Blade

All kinds of grass and weeds can be

easily cut with the grass cutting blade.

The power tool is swept in an arc similar

to a scythe.

WARNING

To reduce the risk of serious or fatal

injury from blade breakage, never

attempt to use this blade to cut woody

materials.

The 4-tooth grass cutting blade is

intended to cut grass and weeds. It has

4 cutting knives with cutting edges on

both sides, i.e. front and rear. When the

cutting edges on one side become dull,

the blade can be turned over to utilize

the cutting edges on the other side.

The 8-tooth grass cutting blade is

recommended for cutting fern or reed.

Both types of grass cutting blade have to

be resharpened when all cutting edges

are dull.

Using the Brush Knife

When fitted to the power tool, the brush

knife is suitable for applications ranging

from cutting matted grass to clearing

weeds, wild growth and scrub.

To cut wild growth and scrub, lower the

rotating brush knife down onto the

growth to achieve a chopping effect –

but keep the tool below waist height at

all times.

WARNING

Exercise extreme caution when using

this method of cutting. The higher the

cutting attachment is off the ground, the

greater the risk of loss of control and of

cuttings being thrown sideways.

Use the power tool like a scythe to cut

grass, i.e. sweep it to and fro in an arc.

WARNING

When cutting woody materials, use the

left side of the blade to avoid "kickout"

(blade thrust) situations.

WARNING

Improper use of a brush knife may cause

it to crack, chip or shatter. Thrown blade

fragments may seriously or fatally injure

the operator or bystanders. To reduce

the risk of injury, avoid contact with hard

or solid foreign objects such as stones,

rocks or pieces of metal.

WARNING

When cutting young saplings or other

woody materials up to 2 cm (3/4 in.) in

diameter, use the left side of the blade to

avoid "kickout" situations (see section

on "Risk of kickout (blade thrust) with all

rigid cutting blades"). Do not attempt to

cut woody material with a larger

diameter, since the blade may catch or

jerk the power tool forward. This may

cause damage to the blade or power tool

or loss of control of the power tool,

resulting in personal injury. Use a

circular saw blade for such work.

WARNING

Inspect the brush knife at regular short

intervals for signs of damage. Do not

continue working with a damaged brush

knife. Resharpen the brush knife

regularly (when it has dulled noticeably).

Using the Circular Saw Blade

Circular saw blades are suitable for

thinning brush and cutting small trees up

to a diameter of 7 cm (2 3/4 in.). Do not

attempt to cut trees with larger

diameters, since the blade may catch or

jerk the clearing saw forward. This may

cause damage to the blade or loss of

002BA355 KN

002BA509 KN

002BA067 KN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl FS 510 C-M Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl FS 510 C-M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info