FS 130, FS 130 R
English
36
Maintenance and Care
The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
Before starting work
At the end of work and/or
daily
Whenever tank is refilled
Weekly
Monthly
Yearly
If faulty
If damaged
As required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Replace any damaged parts XX
Control handle Function tests XX
Air filter
Visual inspection X X
Clean XX
Replace X
Manual fuel pump (if present)
Check X
Have repaired by a specialist dealer
1)
X
Fuel pickup body in fuel tank
Have checked by a specialist dealer
1)
X
Have them replaced by a servicing
dealer
1)
XXX
Fuel tank Clean XX
Carburetor
Check idle adjustment, cutting attach-
ment must not turn
XX
Setting the idle speed X
Spark plug
Set electrode gap X
Replace after every 100 hours of
operation
Cooling air intakes
Visual inspection X
Clean X
Cylinder fins
Have them cleaned by a servicing dealer
1)
X
Valve clearance
Check and adjust if necessary, once
after 139 hours of operation, by servic-
ing dealer
1)
X
