Bedienungsanleitung Stihl HL92 (Seite 7 von 36) (Englisch)

667380

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HL 92, HL 92 K

English

Place the power tool on firm ground in

an open area. Make sure you have good

balance and secure footing. Hold the

power tool securely. The cutting blades

must be clear of the ground and all other

obstructions because they may begin to

run when the engine starts.

Your power tool is designed to be

operated by one person only. Do not

allow other persons in the work area –

even when starting.

To reduce the risk of injury, avoid

contact with the cutting blades.

Do not drop start the power tool – start

the engine as described in the

instruction manual. Note that the cutting

blades continue to run for a short period

after you let go of the throttle trigger

(flywheel effect).

Check idle speed setting: The cutting

blades must not move when the engine

is idling with the throttle trigger released.

To reduce the risk of fire, keep hot

exhaust gases and hot muffler away

from easily combustible materials (e.g.

wood chips, bark, dry grass, fuel).

Holding and Controlling the Power Tool

Always hold the power tool firmly with

both hands on the handles.

Make sure you have firm and secure

footing and hold the power tool so that

the cutting blades are always away from

your body.

Some versions of the machine can be

carried on a harness to relieve the

weight on the operator's arms.

Models with loop handle

Right hand on control handle, left hand

on loop handle on drive tube, even if you

are left-handed. Wrap fingers and

thumbs firmly around the handles.

Machines with handle hose

Right hand on control handle, left hand

on handle hose on drive tube, even if

you are left-handed. Wrap fingers and

thumbs firmly around the handles.

During Operation

In the event of impending danger or in

an emergency, switch off the engine

immediately – move the stop switch in

the direction of 0.

To reduce the risk of damage to

property, also maintain this distance

from other objects (vehicles, windows).

Watch the cutting blades at all times – do

not cut areas of the hedge that you

cannot see.

Be extremely careful when cutting tall

hedges, check the other side of the

hedge before starting work.

Make sure the idle speed setting is

correct. The cutting blades must not run

when the engine is idling with the throttle

trigger released. Check and correct the

idle speed setting regularly. If the cutting

blades still run when the engine is idling,

have your dealer check your machine

and make proper adjustments or repairs.

Note that the cutting blades continue to

run for a short period after you let go of

the throttle trigger – flywheel effect.

Take special care in slippery conditions

(ice, wet ground, snow) – on slopes or

uneven ground.

Clear away fallen branches, scrub and

cuttings.

0000-GXX-1677-A00000-GXX-1678-A0

This power tool is not

insulated against electric

shock. To reduce the risk

of electrocution, keep

well clear of electric

power lines.

To reduce the risk

of injury from mov-

ing blades or falling

cuttings, do not

allow bystanders

within 5 meters of

your own position.

5m (17ft)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl HL92 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl HL92

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info