Bedienungsanleitung Stihl HS 56 (Seite 7 von 28) (Englisch)

537304

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

HS 46, HS 46 C, HS 56 C

English

Holding and Controlling the Unit

Always hold the power tool firmly with

both hands on the handles. Wrap your

fingers and thumbs around the handles.

Right-handers

Right hand on the control handle and left

hand on the front handle.

Left-handers

Left hand on the control handle and right

hand on the front handle.

Make sure you have firm and secure

footing and hold the power tool so that

the cutting blades are always away from

your body.

During Operation

In the event of impending danger or in

an emergency, switch off the engine

immediately – move the Master Control

lever in the direction of STOP or †.

Check that there are no bystanders in

the general work area.

Watch the cutting blades at all times – do

not cut areas of the hedge that you

cannot see.

Be extremely careful when cutting tall

hedges, check the other side of the

hedge before starting work.

Make sure the idle speed setting is

correct. The cutting blades must not run

when the engine is idling with the throttle

trigger released.

If the cutting blades still run, have your

dealer check your machine and make

proper adjustments or repairs. Check

and correct the idle speed setting

regularly.

Note that the cutting blades continue to

run for a short period after you let go of

the throttle trigger – flywheel effect.

The gearbox becomes hot during

operation. To reduce the risk of burn

injury, do not touch the gearbox housing.

Take special care in slippery conditions

(ice, wet ground, snow), on slopes or

uneven ground.

Clear away fallen branches, scrub and

cuttings.

Watch out for obstacles: Roots, tree

stumps or holes which could cause you

to trip or stumble.

Make sure you always have good

balance and secure footing.

When working at heights:

– Always use a lift bucket

– Never work on a ladder or in a tree

– Never work on an insecure support

– Never operate your power tool with

one hand

Be particularly alert and cautious when

wearing hearing protection because

your ability to hear warnings (shouts,

alarms, etc.) is restricted.

To reduce the risk of accidents, take a

break in good time to avoid tiredness or

exhaustion.

Work calmly and carefully – in daylight

conditions and only when visibility is

good. Stay alert so as not to endanger

others.

To reduce the risk of serious or fatal

injury from breathing toxic fumes,

ensure proper ventilation when working

in trenches, hollows or other confined

locations.

0008BA001 KN

0008BA002 KN

Your power tool produces

toxic exhaust fumes as

soon as the engine is

running. These fumes

may be colorless and

odorless and contain

unburned hydrocarbons

and benzol. Never run

the engine indoors or in

poorly ventilated loca

tions, even if your model

is equipped with a cata

lytic converter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl HS 56 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl HS 56

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info