537304
14
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
HS 46, HS 46 C, HS 56 C
English
12
Choke closed l – this position is used
to start a cold engine. The Master
Control lever moves to the normal run
position F when the throttle trigger is
squeezed.
Setting the Master Control Lever
To move the Master Control lever from
the normal run position F to choke closed
l, press down the throttle trigger
lockout and squeeze the throttle trigger
at the same time and hold them in that
position – now set the Master Control
lever.
To select the starting throttle
position n, move the Master Control
lever to choke closed l first, then push
it into the starting throttle position n.
The Master Control lever moves from
the starting throttle position n or choke
closed position l to the normal run
position F when you press down the
throttle trigger lockout and blip the
throttle trigger at the same time.
To switch off the engine, move the
Master Control lever in the direction of
STOP or when released, the Master
Control lever springs back to the normal
run position F.
Start the engine.
N Press the manual fuel pump bulb at
least five times – even if the bulb is
filled with fuel.
N Set the Master Control lever to suit
the engine temperature.
Cold engine (cold start)
N Depress the throttle trigger
lockout (1) and the throttle
trigger (2) at the same time – hold
both levers in that position.
N Move the Master Control lever (3) to
l.
N Release the throttle trigger
lockout (1), throttle trigger (2) and
Master Control lever.
Warm engine (warm start)
N Depress the throttle trigger
lockout (1) and the throttle
trigger (2) at the same time – hold
both levers in that position.
N Move the Master Control lever (3) to
n.
N Release the throttle trigger
lockout (1), throttle trigger (2) and
Master Control lever.
Also use this setting if the engine has
been running but is still cold.
Starting
N Place the unit on the ground.
N Remove the blade scabbard. Check
that the cutting blades are not
touching the ground or any other
obstacles.
0008BA008 KN
3
0008BA009 KN
1
2
3
0008BA010 KN
1
2
0008BA011 KN
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stihl HS 56 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Stihl HS 56

Stihl HS 56 Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info