Bedienungsanleitung Stihl MS192 (Seite 27 von 130) (Englisch, Spanisch)

52171

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

English / USA

MS 192 C

!Warning!

Do not operate your chainsaw if the

muffler is damaged, missing or modified.

An improperly maintained muffler will

increase the risk of fire and hearing loss.

If your muffler was equipped with a

spark-arresting screen to reduce the risk

of fire, never operate your saw if the

screen is missing or damaged.

Remember that the risk of forest fires is

greater in hot or dry weather.

Keep the chain, bar and sprocket clean;

replace worn sprockets or chains. Keep

the chain sharp. You can spot a dull

chain when easy-to-cut wood becomes

hard to cut and burn marks appear on

the wood. Keep the chain at proper

tension.

Tighten all nuts, bolts and screws except

the carburetor adjustment screws after

each use.

!Warning!

In order for the chain brake on your

STIHL chainsaw to properly perform its

function of reducing the risk of kickback

and other injuries, it must be properly

maintained. Like an automobile brake, a

chainsaw chain brake incurs wear each

time it is engaged.

The amount of wear will vary depending

upon usage, conditions under which the

saw is used and other factors. Excessive

wear will reduce the effectiveness of the

chain brake and can render it

inoperable.

For the proper and effective operation of

the chain brake, the brake band and

clutch drum must be kept free of dirt,

grease and other foreign matter which

may reduce friction of the band on the

drum.

For these reasons, each STIHL

chainsaw should be returned to trained

personnel such as your STIHL servicing

dealer for periodic inspection and

servicing of the brake system according

to the following schedule:

Heavy usage - every three months,

Moderate usage - twice a year,

Occasional usage - annually.

The chainsaw should also be returned

immediately for maintenance whenever

the brake system cannot be thoroughly

cleaned or there is a change in its

operating characteristics.

For any maintenance of the emission

control system please refer to the

maintenance chart and to the limited

warranty statement near the end of the

instruction manual.

Store chainsaw in a dry place and away

from children. Before storing for longer

than a few days, always empty the fuel

tank (see chapter "Storing the Machine"

in the instruction manual).

You can run chains of different pitches

on this chainsaw – depending on the

chain sprocket (see “Specifications“):

The chain pitch (1) must match the guide

bar. The drive link gauge (2) must match

the guide bar groove width (3).

The pitch is marked in inches on

the sprocket and guide bar (e.g. 3/8

or .325) and the groove width is

additionally marked on the bar in

millimeters (e.g. 1.6).

Do not run non-matching

components together (different

pitches or drive link gauges) since

they will otherwise be damaged

beyond repair within a very short

period of operation.

Mounting the Bar and Chain

001BA105 KN

t = a : 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl MS192 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl MS192

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info