52209
53
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
MS 441
English
51
Definitions
1 Carburetor Box Cover with Clips.
Lock for carburetor box cover.
2 Carburetor Adjusting Screws.
For tuning the carburetor.
3 Handle Heating Switch (Special
Option).
For switching the electric handle
heating on and off.
4 Spark Plug Boot.
Connects the spark plug with the
ignition lead.
5 Shutter.
With summer and winter positions.
Carburetor is heated in winter
position.
6 Decompression Valve –
(autmatically resetting).
Releases compression pressure to
make starting easier - when
activated.
7 Chain Brake.
A device to stop the rotation of the
chain. Is activated in a kickback
situation by the operator's hand or
by inertia.
8 Chain Sprocket.
The toothed wheel that drives the
saw chain.
9 Chain Sprocket Cover.
Covers the clutch and chain
sprocket.
10 Chain Catcher.
Helps to reduce the risk of operator
contact by a chain when it breaks or
comes off the bar.
11 Chain Tensioner.
Permits precise adjustment of chain
tension.
12 Bumper Spike.
Toothed stop for holding saw steady
against wood.
13 Guide Bar.
Supports and guides the saw chain.
14 Oilomatic Saw Chain.
A loop consisting of cutters, tie
straps and drive links.
15 Oil Filler Cap.
For closing the oil tank.
16 Muffler.
Reduces engine exhaust noise and
diverts exhaust gases away from
operator.
17 Front Hand Guard.
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
18 Front Handle.
Handlebar for the left hand at the
front of the saw.
19 Starter Grip.
The grip of the pull starter, for
starting the engine.
20 Fuel Filler Cap.
For closing the fuel tank.
21 Master Control Lever.
Lever for choke control, starting
throttle, run and stop switch
position.
22 Throttle Trigger.
Controls the speed of the engine.
23 Throttle Trigger Lockout.
Must be depressed before the
throttle trigger can be activated.
24 Rear Handle.
The support handle for the right
hand, located at the rear of the saw.
25 Rear Hand Guard.
Gives added protection to
operator's right hand.
Guide Bar Nose.
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
Clutch.
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
Anti-Vibration System.
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
transmission of vibrations created
by the engine and cutting
attachment to the operator's hands.
(not illustrated)
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stihl MS441 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Stihl MS441

Stihl MS441 Bedienungsanleitung - Deutsch - 200 seiten

Stihl MS441 Bedienungsanleitung - Englisch - 130 seiten

Stihl MS441 Bedienungsanleitung - Holländisch, Französisch, Italienisch - 200 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info