Bedienungsanleitung Stihl MSE200 (Seite 10 von 94) (Englisch, Spanisch)

52229

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

9MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C

English / USA

If you use an extension cord, be sure to

use one heavy enough to carry the

current your electric saw will draw. An

improper gauged extension cord will

cause a drop in wire voltage resulting in

loss of power and overheating. Use only

extension cords having an electrical

rating not less than the rating of the

product.

The following table shows the correct

size to use depending on cord length

and machine label ampere rating.

Minimum wire size for extension

cords for 120 Volt appliances:

Cord types: SJW-A or SJTW-A

Round jacketed cords.

* not recommended

Listed by UL, W-A marking on cable

jacket indicates "use outdoors".

Appropriate extension cords are

available in stores spezializing in

electrical equipment.

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other).This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

the proper outlet. Do not change the

plug in any way.

!Warning!

Position the electric cable so that it will

not be damaged when using the electric

saw. Always keep the electric cable

behind the operator and away from the

bar and chain. Always be sure that your

cable does not become entangled with

obstacles or objects. Damaged cables

may cause electrocution. If you take a

break at your work, always disconnect

the cable.

Working Conditions

Operate the chainsaw under good

visibility and daylight conditions only.

!Warning !

Your saw is a one person saw. Do not

allow other persons to be near the

running chain saw. Operate your saw

without assistance.

!Warning !

Be sure that the guide bar and chain are

clear of you and all other obstructions

and objects, including the ground. If the

bar nose near the upper quadrant

touches an object, it may cause

kickback to occur (see section on

reactive forces). Never attempt to start

the chainsaw when the guide bar is in a

cut or kerf.

!Warning!

Use of this product (including sharpen-

ing the saw chain) can generate dust,

mists and fumes containing chemicals

known to cause respiratory disease,

cancer, birth defects, or other

reproductive harm. If you are unfamiliar

with the risks associated with the

particular dust, mist or fume at issue,

consult your employer, governmental

agencies such as OSHA and NIOSH

and other sources on hazardous

materials. California and some other

authorities, for instance, have published

lists of substances known to cause

cancer, reproductive toxicity, etc. Control

dust (such as sawdust), mists (such as

oil mist from chain lubrication) and

fumes at the source where possible.

Using not more than 12 amps

Cord length (ft) 50 100 150

Wire size (AWG) 14 12 10

Using not more than 15 amps

Cord length (ft) 50 100 150

Wire size (AWG) 10 * *

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl MSE200 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl MSE200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info