Bedienungsanleitung Stihl MSE200 (Seite 15 von 94) (Englisch, Spanisch)

52229

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

English / USA

MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C

When a kickback occurs, the guide bar

may rotate around the front handle. If the

cutting position is such that the

operator's left hand is gripping the front

handle behind the hand guard, and if the

left hand rotates around the front handle

and makes a sufficiently forceful contact

with the front hand guard, which is the

Quickstop activating lever, this contact

will activate the Quickstop. The chain

brake on most new model STIHL

chainsaws can also be activated by

inertia. See the chapter entitled "Chain

Brake" of your Owner's Manual.

!Warning!

Never operate your chainsaw without a

front hand guard. In a kickback situation

this guard helps protect your left hand or

other parts of your body. In addition,

removal of the hand guard on a saw

equipped with a chain brake will

deactivate the chain brake.

!Warning!

No Quickstop or other chain brake

device prevents kickback. These

devices are designed to reduce the risk

of kickback injury, if activated, in certain

kickback situations. In order for the

Quickstop to reduce the risk of kickback

injury, it must be properly maintained

and in good working order. See the

chapter entitled "Chain Brake" and

"Maintenance, Repair and Storing" of

your Owner's Manual. In addition, there

must be enough distance between the

bar and the operator to ensure that the

Quickstop has sufficient time to activate

and stop the chain before potential

contact with the operator.

!Warning!

An improperly maintained chain brake

may increase the time needed to stop

the chain after activation, or may not

activate at all.

Low kickback saw chain and reduced

kickback bars

STIHL offers a variety of bars and

chains. STIHL reduced kickback bars

and low kickback chains are designed to

reduce the risk of kickback injury. Other

chains are designed to obtain higher

cutting efficiency or sharpening ease but

may result in higher kickback tendency.

STIHL has developed a color

codesystem to help you identify the

STIHL reduced kickback bars and low

kickback chains. Cutting attachments

with green warning decals or green

labels on the packaging are designed to

reduce the risk of kickback injury. The

matching of green decaled electric

chainsaws with green labeled bars and

green labeled chains gives compliance

with the computed kickback angle

requirements of § 30 of UL 16 62 / ANSI

B 175.1-2000 when the products are in

their original condition. Products with

yellow decals or labels are for users with

extraordinary cutting needs and

experience and specialized training for

dealing with kickback.

STIHL recommends the use of its

green labeled reduced kickback bars,

green labeled low kickback chains

and a STIHL Quickstop chain brake

for both experienced and

inexperienced chainsaw users.

001BA075 LÄ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl MSE200 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl MSE200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info