667193
17
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
RB 200
English
15
N Release the trigger lockout (1)
N Squeeze the spray gun trigger (2)
and wait until a uniform water flow
emerges from the spray lance
N Release the spray gun trigger and
engage the trigger lockout
NOTICE
Lack of water can damage the high-
pressure pump. Only start the engine
when the water hose is connected and
the water supply is turned on.
Selecting the appropriate spray nozzle
The pressure washer is offered with a
range of high-pressure nozzles that can
be connected to the spray lance.
1 Fan-jet nozzle (yellow) jet angle 15°
Nozzle for removing stubborn dirt.
2 Fan-jet nozzle (green) jet angle 25°
Universal nozzle for cleaning large
surfaces.
3 Low-pressure nozzle (black) jet
angle 65°
Nozzle for use with a detergent.
Use the low-pressure connector
and suction hose to draw detergent
from a detergent container. The
detergent is added to the water in
the high-pressure pump.
Inserting the spray nozzle
WARNING
To reduce the risk of severe laceration
and other personal injury from fluid
injection, shut off the pressure washer,
relieve system pressure and lock the
spray gun trigger before removing,
installing or adjusting any spray nozzle
or accessory.
WARNING
Confirm that the nozzle is fixed securely
in the quick-action coupling. If the high-
pressure nozzle is not secure, it can fly
out of the spray lance during operation
and cause injury.
N Shut off the pressure washer and
squeeze the spray gun trigger to
relieve system pressure
N Lock the spray gun trigger
N Remove all sand and debris from
the connection
N Pull back the coupling sleeve (1) as
far as it will go and hold it there
N Push the high-pressure nozzle (2)
as far as it will go into the coupling
N Push the coupling sleeve forward as
far as it will go
N Pull the high-pressure nozzle and
confirm that it is seated securely
0000-GXX-0330-A0
1
2
Inserting and Removing the
Spray Nozzle
15°
25°
15 25
65°
1
2
3
0000-GXX-0327-A0
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stihl RB 200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info