Bedienungsanleitung Stihl RE 551 (Seite 41 von 284) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

537341

Zoom out

Zoom in

Vorherige Seite

1/284

Nächste Seite

RE 521, RE 551 PLUS, RE 581, RE 581 PLUS

English

– Unsuitable detergents can cause

damage to health, as well as to the

machine and the object to be

cleaned. Contact a servicing dealer

if in doubt.

– STIHL recommends the use of

genuine STIHL detergents. Follow

the instructions for use.

– Chemical detergents may contain

physiologically harmful (toxic,

caustic, irritant), flammable or

explosive substances. In the event

of skin or eye contact with

detergent, flush the affected body

parts with plenty of clean water

immediately. If detergent is

swallowed, seek medical attention

immediately. Note the

manufacturer's safety data sheets!

Detergents should always be used in the

proportions specified by the

manufacturer.

Before starting work

Do not use the machine with dirty water.

If there is a risk that dirty water will occur

(e. g., flowing sand), an appropriate

water filter must be used.

Switch off the machine before filling with

fuel.

The fuel tank may only be filled when the

machine is switched off and the heat

exchanger is cold. Do not smoke and

keep the machine away from naked

lights.

Inspecting the high-pressure cleaner

– The high-pressure cleaner should

only be used if it is in full working

order – risk of accident!

– It must be possible to move the

switch to the 0 position easily

– The switch must be in the 0 position

– Inspect the high-pressure hose,

spray attachment and safety

mechanisms for damage

– High-pressure hose and spray

attachment in good condition

(clean, moving easily) and correctly

assembled

– For good control of the machine, the

handles should be clean and dry

with no oil or dirt on them

– Check the oil level

– Never attempt to modify the controls

or safety devices

Electrical connection

Minimize the risk of electrical shock:

– Voltage and frequency of the

machine (see rating plate) must

match the voltage and frequency of

the mains supply

– Examine the power cord, power

plug and extension cord for

damage. Damaged cords,

couplings and plugs or power cords

that do not comply with the

regulations must not be used

– Only connect the machine to a

correctly installed power socket

– The insulation on the power cord

and any extension cord, the plug

and the coupling must be fully intact

Route the power cord and extension

cord properly:

– Observe the minimum cross-section

of the individual cords – see

"Connecting the machine to the

power supply"

– Route and mark the power cord so

that it cannot become damaged and

no one is endangered – danger of

stumbling!

– The connector and coupling of the

extension cord must be waterproof

or routed in such a way that they

cannot come into contact with water

– the connector and coupling of the

extension cord must not lie in water

– don't let the cord rub against edges

or pointed or sharp objects

– don't squeeze the cord under doors

or windows

– if cords become snarled – unplug

the power plug and unsnarl the cord

–

always unroll the power cord from

the cable drum completely to avoid

risk of fire due to overheating

During work

Warning!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl RE 551 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info