Bedienungsanleitung Stihl RMA 510 (Seite 13 von 80) (Englisch, Spanisch)

667192

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

RMA 510

English

If the motor is thermally overloaded

during operation, it is designed to cut out

automatically and must cool down

before it is restarted. Causes of

overload:

– Mowing overlong grass or cutting

height set too low.

– Feed rate too high from walking too

fast.

– Dirty cooling air inlets (intake slots).

Do not operate the mower at

temperatures below 41 °F (5 °C).

Do not mow wet grass.

Do not leave the mower outdoors in the

rain.

Do not operate the machine when there

is a risk of lightning strike.

The switch and safety devices installed

in the machine must not be removed or

bypassed. In particular, never secure

the switch lever to the handle (e.g. by

tying it).

Do not operate the machine with a

folded handle.

Do not switch on the motor if either the

rear or side ejection chute is not

shielded appropriately.

MAINTENANCE, REPAIR AND

STORING

If you make a warranty claim for a

component which has not been serviced

or maintained properly STIHL may deny

coverage.

WARNING

Use only identical STIHL replacement

parts for maintenance and repair,

including the cutting blade. Use of non-

STIHL parts may reduce operational

efficiency or may cause serious or fatal

injury.

Strictly follow the maintenance and

repair instructions in the appropriate

section of your instruction manual.

Please also refer to the maintenance

chart in this manual.

WARNING

Tighten all nuts, bolts and screws after

each use.

Regularly check the electrical contacts

and ensure that the insulation of the

power cord and plug of the charger is in

good condition and shows no sign of

damage.

Electrical components, e.g. power cord

of charger, may only be repaired or

replaced by a qualified electrician.

Clean plastic components with a cloth.

Do not use aggressive detergents. They

may damage the plastic.

Clean cooling air inlets in motor housing

as necessary.

Do not spray the mower with water.

Do not clean your mower with a

pressure washer. The solid jet of water

may damage parts of the machine.

Keep the battery guides free from

foreign matter – clean as necessary.

Maintain or replace warning and

instruction labels as necessary.

Store the mower in a dry, locked location

with the fuse key and battery removed

and out of reach of children.

The drive motor is not

waterproof. Never work

with the lawn mower in

the rain or in wet or very

damp locations.

Always switch off the

motor, remove the fuse

key and battery and

make sure that the cut

ting blade is stopped

before doing any mainte

nance or repair work,

replacing the cutting

attachment or cleaning

the mower. This avoids

the risk of the motor start

ing unintentionally. Do

not attempt any mainte

nance or repair work not

described in your instruc

tion manual. STIHL

recommends having such

work performed by your

STIHL servicing dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl RMA 510 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info