33SR 340, SR 420
English / USA
When the starter rope is fully
extended it must be possible to
rotate the rotor at least another half
turn. If this is not possible, the spring
is overtensioned and could break.
Take one turn of the rope off the
rotor.
: Fit the starter cover on the engine.
: Tighten down the screws firmly.
For periods of about 3 months or longer
: Drain and clean the fuel tank in a
well ventilated area.
: Dispose of fuel properly in
accordance with local
environmental requirements.
: Drain and clean the container.
: Run engine until carburetor is dry –
this helps prevent carburetor
diaphragms sticking together.
: Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
: Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
: Do not expose the container to
direct sunlight for unnecessarily
long periods. UV rays can make the
container material brittle, which
could result in leaks or breakage.
Storing the Machine