Bedienungsanleitung Stomer SJS-600 (Seite 6 von 44) (Alle Sprachen)

555276

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Jig saw

INTENDED USE

This tool is intended for making cut-throughs and cut-outs

in wood, plastic, metal, ceramic plates and rubber, and is

suitable for straight and curved cuts at 0° or 45°.

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. Switch for on/off

2. Button for switch locking

3. Wheel for adjusting sawing speed

4. Lever for selecting sawing mode

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re

and/or serious injury.

• Always keep the cord away from moving parts of the

tool

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

• Never use tool when cord is damaged; have it replaced

by a qualiﬁ ed person

• Do not cut material containing asbestos

• Do not use a saw blade which is cracked, deformed or

dull

• Keep hands away from the saw blade while the tool is

in use

• Remove all obstacles on top of as well as underneath

the cutting path before you start cutting

• Always disconnect plug from power source before

making any adjustment or changing any accessory

• Wear a dust protection mask when working with

materials which produce dust that is detrimental to

health; inform yourself beforehand about the materi-

als to be worked on

• Wear protective goggles when working with materials

which produce chips

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start cutting

• Check the functioning of the tool before each use and,

in case of a defect, have it repaired immediately by a

qualiﬁ ed person; never open the tool yourself

• Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to a

220V supply)

• When used outdoors, connect the tool via a fault cur-

rent (FI) circuit breaker with a triggering current of 30 mA

maximum, and only use an extension cord which is in-

tended for outdoor use and equipped with a splash-proof

coupling-socket

• The noise level when working can exceed 85 dB(A);

wear ear protection

• When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

• SBM Group can assure ﬂ awless functioning of the tool

only when original accessories are used

• Use completely unrolled and safe extension cords with

a capacity of 16Amps (U.K. 13 Amps)

• In case of electrical or mechanical malfunction, imme-

diately switch off the tool and disconnect the plug

• This tool should not be used by people under the age

of 16 years

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

• If for any reason the old plug is cut off the cord of this

tool, it must be disposed of safely and not left unattended

Your machine is double insulated in accordance

with EN 50144; therefore no earthwire is re-

quired.

MAINTENANCE

Make sure that the machine is not live when car-

rying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

Lubricate the saw blade guide regularly.

Should a fault occur, e.g. after wear of a part, please con-

tact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of the

packaging materials can be recycled. Take these materi-

als to the appropriate recycling locations. Take your un-

wanted machines to your local SBM Group dealer. Here

they will be disposed of in an environmentally safe way.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stomer SJS-600 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info