Bedienungsanleitung Stomer SVC-1460 (Seite 11 von 66) (Alle Sprachen)

555301

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

TROUBLESHOOTING

● Switch the vacuum cleaner off immediately as soon

as foam or water comes out, and empty the con-

tainer. Otherwise, the vacuum cleaner can become

damaged.

● The vacuum cleaner is equipped with a ﬂ oat. When

the maximum ﬁ lling height is reached, the suction

capacity is reduced. Set the On/Off switch to posi-

tion “0” and empty the container.

● If the suction force is so high that the connected

power tool adheres too ﬁ rmly against the working

surface, regulate the airﬂ ow.

MAINTENANCE AND CLEANING

● For safe and proper working, always keep the vacu-

um cleaner and ventilation slots clean.

A dust-technical inspection is to be carried out at least

once every year by the manufacturer or an instructed

person, e. g. for damage of the ﬁ lter, tightness against

leakage of the vacuum cleaner and function of the con-

trol/monitoring unit.

For category L vacuum cleaners that were in contami-

nated environments, the exterior as well as all machine

parts should be cleaned or treated with sealants. When

performing maintenance and repair work, all contami-

nated components that cannot be cleaned to satis-

factory must be disposed of. Such components must

be disposed of in impermeable plastic bags conform-

ing with the valid regulations for the disposal of such

waste.

For maintenance on behalf of the user, the vacuum

cleaner must be disassembled, cleaned and main-

tained as far as feasible, without causing a risk for the

maintenance personnel or other persons. Prior to dis-

assembly, the vacuum cleaner should be cleaned in or-

der to prevent any risks. The room/enclosure in which

the vacuum cleaner is disassembled should be well

ventilated. Wear personal protective equipment during

maintenance. After the maintenance, the maintenance

area should be cleaned.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most

of the packaging materials can be recycled. Take

these materials to the appropriate recycling locations.

Take your unwanted machines to your local SBM

Group dealer. Here they will be disposed of in an

environmentally safe way.

ADDITIONAL SAFETY AND WORKING

INSTRUCTIONS

● Observe the mains voltage! The voltage of the pow-

er source must correspond with the data on the type

plate of the vacuum cleaner.

● For dry vacuuming, a dust bag should be inserted.

When using a dust bag, the folded ﬁ lter remains

unclogged longer, the vacuuming performance is

maintained longer, and the disposal of dust is made

easier.

● Remove the dust bag and empty the container be-

fore wet vacuuming.

● The vacuum cleaner has a blower function. Do not

blow the outgoing air randomly in enclosed areas.

Use the blower function only with the a clean hose.

Dusts can be hazardous to one’s health.

● After vacuuming, remove the folded ﬁ lter to prevent

the forming of mould and allow it to dry thoroughly;

especially before using it for dry vacuuming.

● Operate the vacuum cleaner only with the folded ﬁ l-

ter mounted.

● A socket outlet with earthing contact is integrated in

the vacuum cleaner. An external power tool can be

connected there. The vacuum cleaner is automati-

cally put into operation via the power tool. Observe

the maximal allowable load of the connected power

tool.

● The vacuum cleaner may not be used as a water

pump. The vacuum cleaner is intended for vacuum-

ing air and water mixtures.

● Wipe out the container from time to time with a com-

mercially available, non-scouring cleaning agent,

and allow it to dry.

INTENDED USE

The machine is intended for collection, vacuuming,

conveying and separation of non-ﬂ ammable dry dusts

that correspond with the general exposition limit val-

ue of > 1 mg/m

, such as dusts of mineral materials

with aluminium hydroxide, graphite dusts, aluminium

dusts, paper dusts, soot dusts, powder paint dusts,

polyurethane dusts, GFRP dusts based on epoxy resin

(see manufacturer’s data sheet on safety), CFP dusts

based on epoxy resin (see manufacturer’s data sheet

on safety), varnish dusts without carcinogenic compo-

nents, wood dusts and non-ﬂ ammable liquids and wa-

ter-air mixtures. The vacuum cleaner is dust-technically

checked and corresponds with dust category L.

The vacuum cleaner has a blower function, e. g. for

drying surfaces.

The vacuum cleaner has a socket outlet with remote

automatic switching for connection of a power tool with

extraction function.

It is suitable for the increased demands of industrial us-

age, as required in trades, industry and workshops.

The vacuum cleaner may generally not be used in

rooms where the danger of an explosion exists.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stomer SVC-1460 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info