597140
16
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
16
6.6 POWER ON / OFF
To power the system on, connect the power cable to the DC 12V port on the rear panel. At start-up, the DVR
performs a basic system check and runs an initial loading sequence. After a few moments, it will load a live display
view.
The system can also be put into standby mode. It will still receive power but will not record anything until brought
back into operation mode.
1. To put the system in standby, press and hold the power button on the front panel or remote control until
the on-screen prompt closes.
2. To wake the system from standby mode, press and hold the power button on the front panel or remote
control until the DVR displays “System Initializing” on screen. The system will begin powering up.
6.7 PASS CODES
By default, pass codes are disabled on the system. You do not need to enter a pass code when accessing any menus.
For security purposes, it is highly recommended to enable pass codes via the Password Menu.
6.8 FORMAT THE HARD DISK DRIVE
This DVR uses a Hard Disk Drive (HDD) to record and store video footage. You must format the HDD before it can be
used to record video.
Go to Main Menu HDD HDD Format, to prepare the drive for use. Refer to section 7.7 HDD Management
(page 25) for instructions on how to do this. After formatting is complete, follow the on-screen prompts to restart
the system.
NOTE
If no HDD is installed, or the HDD is not formatted, a red “H” symbol will be displayed on screen.
6.9 SYSTEM LOGIN
To open the main menu, press the MENU / EXIT button on the remote control or front panel of the system.
Alternatively using the mouse, right-click anywhere on screen to open the Sub Menu, then select MAIN MENU.
NOTE
If pass codes are enabled on the system, you need to select your Device ID and enter the 6-digit numerical
pass code to open the main menu.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Storage Options 53294 - 8 Channel CCTV DVR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info