Bedienungsanleitung Stovax Studio Air (Seite 8 von 32) (Englisch, Französisch, Italienisch)

813435

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TROUBLESHOOTING

Operation - Difficulty starting and maintaining a fire

• Ensure the wood used is less than 20% moisture.

• Warm the flue through the stove using a blowtorch or some

newspaper.

• Ensure all air controls are being operated correctly.

• Open a nearby window to test the airflow in the room.

• Make sure the airways and flue are swept and in good

condition. Any full or partial blockage will effect the

performance of the appliance.

• Re-read the lighting instructions and ensure the correct

procedure is followed including fuel amounts.

Glass Blackening

When burning wood and solid fuel there will always be some

discolouration of the glass. However excessive build can be

caused by:

• Wood will a moisture content of greater than 20% will have

poor combustion and smoke, giving off tar and creosote.

• Low combustion temperature. This will not create sufficient

flue draft leading to poor combustion and a fire that produces

more smoke.

• Incorrect fuelling/refuelling leading to a poor fire or one that

touches the glass.

Excessive smell of Smoke

• Weather conditions can result in wind blowing down the

chimney when coming fro certain directions.

• Door opened when lots of flames remained in the firebox.

Parts have become discoloured

• To allow the appliance to settle, and fixing glues and paint to

fully cure, operate the appliance at a low temperature for first

few days.

• Do not touch the paint during the first period of use.

• During this time the appliance may give off some unpleasant

odours. Keep the room well ventilated to avoid a build-up of

fumes.

• Please be aware that, during use, paint and rope seals may

discolour. This is normal.

Warranty Issues - for full warranty terms and conditions see the

booklet supplied with your appliance.

Should you experience problems with your Stove or Fireplace, any

claim must be submitted first to the Expert Retailer from whom the

product was purchased. Your Expert Retailer will either be able to

offer immediate assistance or having visited you make contact with

Stovax on your behalf. For a Service call to be arranged Stovax

will require proof of registration, commissioning documents and

service history if applicable (Service history required for all product

over 12-months old). Any Warranty claim without the required

information will be referred back to your Expert Retailer from whom

you purchased it.

Due to continual technical improvements please check online or with your Stovax retailer for the most up to date parts lists.

Only use Genuine Stovax spares when servicing your appliance.

All of our essential spare parts and consumable items are available to purchase from our webshop at www.stovaxspares.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stovax Studio Air Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info