Bedienungsanleitung Stovax View Freestanding (Seite 7 von 36) (Englisch)

813455

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Open the Primary Air Control fully to establish a glowing

bed before adding new fuel.

Burn new fuel at a high temperature for a few minutes before

adjusting the Primary Air Control to the desired setting.

Refuel little and often for clean, efficient burning.

When burning solid fuel more primary air will increase the

heat output and burn the fuel more quickly.

A small amount of Airwash can sometimes help to keep the

glass clean but will reduce efficiency.

5.8 Experience establishes settings to suit personal preference.

5.9 Do not burn large amounts of fuel with the Primary Air

Control on a low combustion setting for long periods of

time. This reduces the glass cleaning effect of the Airwash

and causes tars and creosotes to build-up in the appliance

and flue system.

5.10 When in use, burning the appliance at a high temperature

for a short period reduces tars and creosotes.

WARNING: DO NOT OPERATE THE APPLIANCE WITH

THE PRIMARY AIR CONTROL OPEN FOR LONG

PERIODS OF TIME AS THIS COULD CAUSE OVER-

FIRING AND MAY CAUSE PERMANENT DAMAGE.

5.11 Only anthracite or smokeless fuels suitable for use in

closed appliances must be burned in this appliance.

5.12 Donotburnbituminouscoal,‘petro-coke’orother

petroleum based fuels as this invalidates the product

guarantee.

5.13 Do not load fuel above the log guard and the Secondary

Air Inlets at the back of the firebox, see Diagram 8.

Shut Down

5.14 If there is still burning fuel in the firebox, Stovax do not

recommend shutting down the air controls completely

unless there is a chimney fire in progress (see section 9

for advice). Closing the controls during the burning process

will cause poor combustion and could lead to a build up of

gasses that could ignite dangerously.

5.15 Always have enough air entering the stove to maintain some

flame within the firebox.

5.16 If it is necessary to shut down the appliance then run on a

high setting until all of the fuel has been burnt before closing

the air controls.

6. Extended Burning

6.1 It is possible to get the appliance to burn for extended

periods of time. In order to do this:

—De-ashpriortonalrefuelling.

— Burn new fuel at a high temperature for a few minutes

before adjusting the Primary Air Control.

— Set air controls to low combustion settings.

This will gradually blacken the glass but it will clear when

operated at a high temperature for a short period.

Wood burns best on a bed of ash (approx. 25mm (1") deep).

Rake the embers evenly over the firebed and open the

Airwash Control fully for a few minutes before re-fuelling.

5.2 Burn new logs at a high temperature for a few minutes

before adjusting the Airwash Control. Refuel little and often

for clean, efficient burning. More Airwash will increase the

heat output, burn fuel more quickly and will help keep the

glass clean.

Small amounts of Primary Air can sometimes help to

maintain a hot fuel bed.

5.3 Do not burn large amounts of fuel with the Airwash

Control closed for long periods of time. This reduces the

glass cleaning effect of the Airwash and causes tars and

creosotes to build-up in the appliance and flue system.

5.4 When in use, burning the appliance at a high temperature

for a short period reduces tars and creosotes.

WARNING: DO NOT OPERATE THE APPLIANCE WITH

THE PRIMARY AIR CONTROL OPEN FOR LONG

PERIODS OF TIME AS THIS COULD CAUSE OVER-

FIRING AND MAY CAUSE PERMANENT DAMAGE.

5.5 Experience establishes settings to suit personal preference.

Multi-fuel Stove

5.6 Burning Solid Fuel

Solid Fuel can only be burned in a multi-fuel stove.

Only for use with recommended fuels ,

(see User Instructions, Section 3).

Allow the fire to become established before adding the solid

fuel:

—Set air controls, see Diagram 10.

Airwash: 50%

Primary Air:

50%

5.7 De-ash the grate before re-fuelling (see User Instructions,

Section 7).

User Instructions

*In the U.K:

 •RingtheSolidFuelAssociationadvicelineon

0845 601 4406 for details

 •Visittheirwebsiteatwww.solidfuel.co.uk

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stovax View Freestanding Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stovax View Freestanding

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info