Bedienungsanleitung Stoves ST444989 Breeze 190 (Seite 7 von 40) (Englisch, Holländisch)

706333

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

EN - 7

1.2 Installation warnings

Before using your fridge freezer for the rst

time, please pay attention to the following

points:

• The operating voltage for your fridge

freezer is 220-240 V at 50Hz.

• The plug must be accessible after

installation.

• Your fridge freezer may have an odour

when it is operated for the rst time.

This is normal and the odour will fade

when your fridge freezer starts to cool.

• Before connecting your fridge freezer,

ensure that the information on the

data plate (voltage and connected

load) matches that of the mains

electricity supply. If in doubt, consult a

qualied electrician.

• Insert the plug into a socket with an

efcient ground connection. If the

socket has no ground contact or the

plug does not match, we recommend

you consult a qualied electrician for

assistance.

• The appliance must be connected

with a properly installed fused socket.

The power supply (AC) and voltage at

the operating point must match with

the details on the name plate of the

appliance (the name plate is located

on the inside left of the appliance).

• We do not accept responsibility for

any damages that occur due to

ungrounded usage.

• Place your fridge freezer where it will

not be exposed to direct sunlight.

• Your fridge freezer must never be

used outdoors or exposed to rain.

• Your appliance must be at least 50

cm away from stoves, gas ovens and

heater cores, and at least 5 cm away

from electrical ovens.

• If your fridge freezer is placed next

to a deep freezer, there must be at

least 2 cm between them to prevent

humidity forming on the outer surface.

• Do not cover the body or top of fridge

freezer with lace. This will affect the

performance of your fridge freezer.

• Clearance of at least 150 mm is

required at the top of your appliance.

Do not place anything on top of your

appliance.

• Do not place heavy items on the

appliance.

• Clean the appliance thoroughly before

use (see Cleaning and Maintenance).

• The installation procedure into a

kitchen unit is given in the installation

manual. This product is intended to be

used in proper kitchen units only.

• Before using your fridge freezer,

wipe all parts with a solution of warm

water and a teaspoon of sodium

bicarbonate. Then, rinse with clean

water and dry. Return all parts to the

fridge freezer after cleaning.

• Use the adjustable front legs to make

sure your appliance is level and

stable. You can adjust the legs by

turning them in either direction. This

must be done before placing food in

the appliance.

• Install the two plastic distance guides

(the parts on the black

vanes -condenser- at

the rear) by turning it

90° (as shown in the

gure) to prevent the

condenser from

touching the wall.

• The distance between the appliance

and back wall must be a minimum of

75 mm.

1.3 During Usage

• Do not connect your fridge freezer to

the mains electricity supply using an

extension lead.

• Do not use damaged, torn or old

plugs.

• Do not pull, bend or damage the cord.

• Do not use plug adapter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stoves ST444989 Breeze 190 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info