Bedienungsanleitung StrengthMaster MX-800 (Seite 8 von 15) (Englisch)

518674

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

MX800/MX850

Manual Function

12 Preset Programs

Target Heart Rate Program

This program automatically modifies the speed and incline to maintain a preset target heart

rate. This target is established in the setup process. The chart on this owners manual should

be used to determine the appropriate target heart rate. To set up the target heart rate program,

you will need to enter the workout time, age, your target heart rate and max. desired speed.

1. Attach safety key and press "MODE" into selecting program mode.

2. Using speed arrow buttons to choose "HRC" program. Then press "ENTER".

3. Using speed or incline arrow buttons to input your age (13-80). Then press "ENTER".

4. Using speed or incline arrow buttons to input your target heart rate (60-180). Then press "ENTER".

5. Using speed arrow buttons to input max. desired speed (3-20). Then press "ENTER".

6. Using speed or incline arrow buttons to input Max, desired incline (5-15). Then press "ENTER".

7. Using speed or incline arrow buttons to input workout time (10~99 Min.) . Then press "START".

Console of 3LED & 1LCD is with 1 Manual function, 12 preset programs, 1 H.R.C program,

Body Mass and 2 user setting programs.

Console of 4 LED & 12 character Alphanumeric LED is with 1 Manual function, 12 preset

programs, 1 H.R.C program.

MX800: 1. Attach safety key and press "MODE" into selecting program mode.

2. Using speed arrow buttons to choose "Manual" function, then press "ENTER".

3. Time window is flashing. Using speed or incline arrow buttons to input workout time (10~99 Min.)

4. Press "START".

MX850: 1. Attach safety key and 12 Alpha bumericdisplay shows "Welcome To Strength Master".

2. Press "Mode" into Mannual aditing mode. 12 Alpha numeric display shows "SET TIME".

3. Using speed or incline arrow buttons to input workout time.(10~99 Min.) Press "ENTER".

4. Press "START".

P1~P5: Automatically change the speed of the treadmill throughout the workout.

P6~10: Automatically change the level of incline for the treadmill belt.

P11: 5km distance program. Automatically change the level of incline for the treadmill belt. The user sets the

speed to a desired level and the program modifies the incline. The user can override the incline for any

segment within the workout but at the end of each workout segment the program will override any

adjustments made to the incline.

P12: 10km distance program. Automatically change the level of incline for the treadmill belt. The user sets

the speed to a desired level and the program modifies the incline. The user can override the incline fo

rany segment within the workout but at the end of each workout segment the program will override any

adjustments made to the incline.

1. Attach safety key and press "MODE" into selecting program mode.

2. Using speed arrow buttons to choose desired preset program "P1~P12". Then press "ENTER".

LCD window shows speed (P1~P5) or incline (P6~P12)

3. Using incline arrow buttons to choose desired level (L1~L3). Then press "ENTER"

4. Using speed or incline arrow buttons to input workout time (10~99 Min.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

StrengthMaster MX-800 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von StrengthMaster MX-800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info