Bedienungsanleitung Stromer Pedelec 2017 (Seite 13 von 37) (Englisch)

780325

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

ENGLISH

Knee angle 90°

When adjusting the height of the seat, nev-

er pull the seat post further out than the maxi-

mum extension length marked! If your tube does

not have a maximum marking, then you must

leave a minimum insertion length of 7.5 cm.

Setting up the angle of the seat

Once you have set the height of the seat, you have

to check that the angle of the seat is suitable. In

general, the upper surface of the seat should be

horizontal. You can adjust this by loosening the

clamping bolts in the seat post.

BEFORE EACH RIDE

Before every ride, please check:

• That the bell/hooter, all electrical plug-in con-

nectors and lighting function correctly and are

safely attached

• That the brakes are working safely and are

properly secured

• That the battery box is safely closed with the

battery inside.

• The tightness of the pipes and connections

• Tires and rims for damage, eccentricity and

penetrating alien objects, particularly after

rides off fortiﬁed roads

• That the tires have a sufﬁcient tread depth

• That the suspension components are working

properly and are safely secured

• The ﬁrm attachment of screws and nuts of quick-

release axles (see “Screw connections” section),

even when the vehicle was only unsupervised

for a short time.

• That the frame and forks are not misshapen or

damaged

• That the handlebars, stem, seat post and seat

are both correctly and securely fastened as well

as set up in the right position

• That the seat post and seat are secure. Try

turning the seat or tipping it upwards or down-

wards. It should not move.

• When you are riding with clipless/step-in ped-

als: Functional testing is required. The pedals

must release easily and without problems.

Do not ride off when you are not completely

sure that your Pedelec is in ﬂawless condition.

Have it inspected by a Stromer dealer.

It is particularly important if you use your Pedelec

a lot, either for sport or daily use, that you regu-

larly have all the important parts checked by a

Stromer dealer.

Frame and forks, suspension components and

other parts relevant to your safety such as brakes

and wheels are subject to heavy wear, which can

impact on the operating safety of these parts.

Components might spontaneously fail when the

predetermined usage period or service life is ex-

ceeded. This can lead to falls and serious injury!

Please make these checks before continuing

after a fall or if your Pedelec falls over! Aluminum

parts cannot be safely bent back into shape, while

carbon components can sustain damage which is

not recognizable to the eye!

If you have fallen

Check the whole of th Pedelec for changes. These

may be dents and cracks in the frame and the fork,

but also bent components. You must also check the

function and safe attachment of parts that have been

shifted or twisted, e.g. the handlebars or the seat.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stromer Pedelec 2017 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stromer Pedelec 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info