Bedienungsanleitung Stromer S-Pedelec 2016 (Seite 16 von 38) (Englisch)

780324

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

16 17

The power button has the following functions:

• Waking up from sleeping mode

• Change from shortcut display to riding display

• Change from riding display to shortcut display

• Change from any point in the menu to the

shortcut display

Switching on

Press the power button to switch on.

When your Stromer has been locked with a

PIN, you must unlock your Stromer after switch-

ing it on before you can use it. (See “Theft protec-

tion” chapter)

Switching off

1. Press the Power button to get to the shortcut

display.

2. Select OFF.

Sleep mode

When the Stromer is not switched off, it will

switch to sleep mode after approx. 5 minutes of

inactivity. The sensor system remains active dur-

ing sleep mode. The system wakes up by itself as

soon as you move the Stromer.

Alternatively, you can also wake up your Stromer

by using the power button.

Always switch off your Stromer by using the

touch screen when you want to prevent it from

switching itself on.

OPERATING ELEMENT

Important functions of the Stromer can be con-

trolled while riding and without taking your hands

off the handlebar, by using the operating element

on the handlebar.

Light button

Plus button

Minus button

Support levels

The + and – buttons of the operating element

on the handlebar make it possible to change be-

tween the following support modes:

Bicycle mode: The motor is switched off.

Support mode 1: Low motor support, optimized

for large driving range.

Support mode 2: Medium motor support – this

support mode can be ﬁne-tuned by using the

Stromer app.

Support mode 3: High motor support for maxi-

mum speed.

The motor support depends on the force that acts

on the pedals. The more ﬁrmly you step onto the

pedals, the stronger the support from the motor.

The motor support stops when you stop pushing

the pedals during the ride. Motor support is only

reactivated when you start working the pedals.

Lighting system

A daytime running light is integrated into your

Stromer to increase safety in daily trafﬁc.

Press the light button on the operating element

on the handlebar to switch the headlight on or off.

In some countries, the daytime running light can

not be turned off.

When you are traveling and your battery is

drained, the motor of the Stromer assumes the

function of a dynamo. This ensures that enough

electricity is produced to power the lighting. Thus

you can always ride safely with your Stromer.

Braking mode / Recuperation

Stromer S-pedelecs can also generate energy with

their motor and thus charge the battery, for ex-

ample, when driving downhill. In this case the

motor acts like a dynamo, i.e. it performs a brak-

ing function and thus generates the power that

charges the battery. This may signiﬁcantly extend

the driving range for a tour. Recuperation can fur-

ther be used as a convenient “engine brake” on

steep or long declines.

As soon as you brake, the motor switches to recuper-

ation/brake mode and supports your braking effort.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stromer S-Pedelec 2016 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stromer S-Pedelec 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info