Bedienungsanleitung Stromer ST3 - 2020 (Seite 17 von 44) (Englisch)

780319

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Support mode 1: Low motor support, optimized

for large driving range.

Support mode 2: Medium motor support – this

support mode can be ﬁne-tuned by using the

Stromer app.

Support mode 3: High motor support for maxi-

mum speed.

The motor support depends on the force that acts

on the pedals. The more ﬁrmly you step onto the

pedals, the stronger the support from the motor.

The motor support stops when you stop pushing

the pedals during the ride. Motor support is only

reactivated when you start working the pedals.

Lighting system

A daytime running light is integrated into your

Stromer to increase safety in daily trafﬁc.

To switch between dipped beam and full beam,

press the light button on the control element on

the handlebar. The Stromer models ST3 and ST5

are equipped with a lighting system that can

switch between dipped beam and main beam.

Just like with cars, a brake light is integrated into

the rear light.

In some countries, the daytime running light can

not be turned off.

Braking mode / Recuperation

Stromer S-Pedelecs can also generate energy

with their motor and thus charge the battery, for

example, when driving downhill. In this case the

motor acts like a dynamo, i.e. it performs a brak-

ing function and thus generates the power that

charges the battery. This may signiﬁcantly extend

the driving range for a tour. Recuperation can fur-

ther be used as a convenient “engine brake” on

steep or long declines.

As soon as you brake, the motor switches to recuper-

ation/brake mode and supports your braking effort.

The braking energy is stored in your battery and

therefore increases the driving range of your

Stromer.

The Stromer offers a braking aid for prolonged

downhill drives. To use this, keep the minus-

button pressed for 2 seconds. The braking force of

your Stromer can now be adjusted by again press-

ing the plus or minus button.

To terminate recuperation, again keep the + or –

button pressed for another 2 seconds.

A weak recuperation level brakes less and is

therefore suitable for ﬂat declines, while strong

recuperation levels brake signiﬁcantly more. The

range is therefore easily and conveniently opti-

mized.

The recuperation is automatically terminated

when the speed falls below a certain minimum

and you step onto the pedals. This speed varies

according to the version of the ﬁrmware loaded. It

is usually below 10 km/h.

Electronic bike horn

Your Stromer is equipped with an electronic bike

horn. The control button is located on the left han-

dlebar grip. Only use the horn to call attention to

yourself in potentially dangerous situations.

TOUCHSCREEN / DISPLAY

Touchscreen

The display of the Stromer is equipped with a re-

sistive touch screen.

That means that the touch screen does not re-

spond to touch, like capacitive touch screens, but

responds to gentle ﬁnger pressure and can there-

fore easily be operated with gloves. Gentle pres-

sure on the touch screen is sufﬁcient to navigate

through various menus or change to the riding

display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stromer ST3 - 2020 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stromer ST3 - 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info