Bedienungsanleitung Strong Helo Power 4 - Smart Wifi Plug (Seite 7 von 8) (Englisch)

766908

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

nYou can say “Alexa, discover devices” to Echo, or you can also tap “Discover devices” on the app to

discover the smart devices.

nDiscovered devices will be shown in the list. (Note : Every time you change the name of devices on

Helo by Strong app, Echo must re-discover devices before taking control).

Now you can control your smart devices through Echo. You can use following commands to control

them (e.g., Plug1) :

nAlexa, turn on/off the Plug1

nAlexa, turn on the plug after 5 mins

Quick Guide of using Google Home

word or phrase, like “BedroomPlug”, “Plug1”, etc.

Set up Google Home with Google Home App

1. Make sure your Google Home is energized.

2. Open the Google Home app by tapping the app icon on your mobile device.

3. Tap “ACCEPT” to agree to the Terms of Service and Privacy Policy. Allow Google Home app to access

the device location to discover and set up nearby devices.

4. Tap “SIGN IN”, choose one of the Google account that you already logged in on your mobile device. Or

follow the instructions to sign in with a new Google account.

5. The Google Home app scans nearby devices that are energized and are ready to set up. Tap “SET UP”

to set up your Google Home.

6. When Google Home app is successfully connected to the Google Home device, tap “PLAY TEST

SOUND”, it will play a test sound to confirm you are connected to the right device. If you heard the test

sound, tap “I HEARD IT”.

7. Select the Room (ex : Living Room) where your Google Home is located. This helps you identify the

device when you want to cast to it. Choose the Wi-Fi network you want to connect to your Google

Home. To automatically fetch the password for this network on this device, tap “OK”, then the

password will populate in the password field. You can also manually enter your password. Then tap

“CONTINUE”.

8. In order for the Google assistant to answer your questions and to enjoy a personalized experience,

you must sign into your Google account, then tap “SIGN UP”. Choose the Google account you want to

link to your Google Home device, then tap “CONTINUE AS XXX”. Enter the address where this Google

Home is installed, and select your default music service.

9. Tap “SKIP TUTORIAL” to finish the setup. You can also tap “CONTINUE” to watch the Google Home

tutorial.

Link Helo by Strong account in Home Control

ATTENTION : Due to the Google Home app’s known bug, you could only use one Google account to

control “Home Control Action”, if you sign in Google Home app with several Google accounts.

Control your smart devices through Google Home

Now you can control your smart devices through Google Home. Take the Smart Wi-Fi Power Plug as the

example, the supported voice commands are as below :

nOk Google, turn on/off the smart plug.

nOk Google, turn on the smart plug after 5 mins.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong Helo Power 4 - Smart Wifi Plug Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong Helo Power 4 - Smart Wifi Plug

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info