Bedienungsanleitung Strong PRIMA VII (Seite 18 von 26) (Englisch)

568529

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and

16:9 (use this setting for 16:9 TV sets).

Connection: Use this option to select the connection to your TV set. Select HDMI or TV

SCART. If connection type HDMI is selected, then only the CVBS signal is

available on the TV SCART.

Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital

audio will be converted to stereo audio. Bitstream enables you to listen or

transfer Dolby® Digital/ Dolby® Digital Plus* audio to the TV via HDMI or to a

Home entertainment system (for example) through coaxial S / PDIF.

*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories

7.3.3 Local Time Setting

Here you can set up your region and time zone.

Region: Use tu to select the region you live in.

GMT Usage: Set to By Region for broadcaster defined time, User Define to select manual a

GMT zone or to Off to input time and date manually.

GMT Offset: Allows you to adjust the time zone you live in. This option is only available

when GMT Usage is set to User Define.The GMT Offset range is “-11:30 ~

+12:00”, increasing by half hours progressively. The cities matching the set

GMT Offset are displayed at the bottom of the screen.

Daylight Saving: Select Off or On to add one hour extra for summer time during the summer.

Date: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the date. Press EXIT to proceed.

Time: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the time. Press EXIT to proceed.

Time Display Select On to display time on screen, Off to remove.

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.

Use pq to select Timer Setting from the System Setup menu and press OK to enter.

The receiver will display a list with 8 timers, followed by their respective status. Select the timer you

wish to set or change with pq and press OK to proceed.

The timer setup menu will now be displayed.

The following settings are available:

Timer Mode: Choose between Off (Timer inactive), Once, Daily (Timer will be executed

every day, same time) or Weekly (Timer will be executed every week, same

day, same time) and Monthly (Timer will be executed every month, same day,

same time).

Timer Service: Choose between Channel (Timer will wake up the receiver) or Record (Timer

will start to record the scheduled event).

Wakeup Channel: Use tu to select the channel the timer will wake up with.

Wakeup Date: Use the 0~9 buttons to input the date for the timed event.

Wakeup Time: Use the 0~9 buttons to input the start time.

Duration: Use the 0~9 buttons to input the timer duration.

When all settings are according to your wishes, use pq to move the highlight to Save and press OK

to confirm. To quit the timer without saving your settings, move the highlight to Cancel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong PRIMA VII Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong PRIMA VII

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info