Bedienungsanleitung Strong SRT 2402 (Seite 15 von 28) (Englisch)

751645

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

NOTE: Over time, channels can be moved to other frequencies, completely

disappear and new channels can appear. Please add these manually if you

miss them or check our website www.strong.tv for latest updates.

After the above steps have been made the receiver will go into viewing mode and you can use and enjoy

it.

Should some steps not be set as you wish or if you like to restart the wizard, you can do so from the DTV

part. Please press and select DTV settings and confirm with OK to enter.

To reset DTV part to default settings, select System and Factory Reset. After entering the PIN code, the unit

is set back to default and all previous channels and settings will be deleted. The unit will return to the first

installation wizard of DTV.

NOTE: The Android part is kept as it is and will not be restored to default. Restoring

Android to default can be done in the Android system settings menu itself

and it will reset everything, including DTV.

5.0 HOW TO USE THE ANDROID PLATFORM

After turning on your receiver, Home opens. The app icons you keep in the tray remain visible on every

Home screen. All app icons in the centre are permanent. Press  to see all your apps and widgets. The

middle of your Home screen can hold app and widget icons as well as folders. To open an app, folder or

widget, click on its icon.

5.1 Connect to Wi-Fi networks

To fully use the Android platform, you first need to setup connection to the Internet. If you missed this

setup in Step 4 of the First Installation Wizard you can setup this connection by selecting Settings from the

Home screen and press OK. Select Network and press OK again. In this menu you can choose if you want

to connect via Wi-Fi or LAN (cable). Enter and store your passwords or other network parameters here.

Passwords and IP settings are provided by your Internet provider (or in-house router). A message appears

to inform about a successfully made setup. Press until you return to the Home screen.

When all settings have been installed, select Browser and press OK to access the Internet.

Turn your Wi-Fi on and connect it to a Wi-Fi network

If a wireless network has been added during the first time installation, Wi-Fi is turned on automatically.

1. Click the settings icon Setting on the Home or All Apps screen.

2. Click the icon Network and then choose Wi-Fi.

3. Slide the Wi-Fi switch to the On position. The device scans for available Wi-Fi networks and

displays the names of those it finds. Secured networks are indicated with . If the device finds a

network that you have connected to previously, it connects to it.

4. Click a network name to see more details or connect to it. If the network is secured, you will be

prompted to enter a password or other credentials. (Ask your network administrator for details.)

To modify the settings of a network, click and hold the network name.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 2402 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 2402

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info