751383
13
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Scan type Select which input source you want to use: DVB-S to receive satellite
broadcasts (and if you are equipped with a satellite dish), DVB-T to receive
terrestrial broadcasts or DVB-C to receive cable broadcasts.
3.1 DVB-S/S2 installation
Satellite Setting
First select the region where you are using the TV. This important to set time zone correct. Use the
t upq and confirm with OK.
Press pq to highlight the satellite your dish is aimed at. Confirm with OK to mark the satellite. Use
the t upq buttons to change settings for your satellite installation for each specific satellite. The
signal quality bar on the bottom of the screen allows you to fine tune the alignment of your antenna for
optimum reception. Adjust your antenna for maximum possible signal quality. When the signal cannot
be improved anymore, fix the dish on this position and press the BLUE Scan button to continue.
Channel Search
Press pq t u to highlight the options of choice and press OK to start the channel search.
Scan Mode Choose between Default (recommended), Blind Scan, Network and Preset
Channel List.*
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and Encrypted channels
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only
or All for a complete search.
It is recommended to use the default settings.
NOTE: *Scan Mode contains an extra option made exclusively for the German
market. By selecting Preset Channel List, the TV will install a special channel
list for Germany. This option is only available when the country Germany is
selected in the First Time Installation.
Another more extensive channel list for Germany and Austria can be
downloaded from our website: www.strong.tv.
3.2 DVB-T/T2 installation
Terrestrial Setting
First select the Tune Type by pressing t u to select DTV, ATV or DTV+ATV (DTV to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press t u to select All
Channels or FTA Channels. Press pq t u to highlight the country that you want to install, then press
OK to start searching.
3.3 DVB-C installation
Cable Setting
Press pq t u to highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search
advised)
9
English
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 24HZ4013N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 24HZ4013N

Strong SRT 24HZ4013N Bedienungsanleitung - Deutsch - 29 seiten

Strong SRT 24HZ4013N Bedienungsanleitung - Holländisch - 23 seiten

Strong SRT 24HZ4013N Bedienungsanleitung - Französisch - 25 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info