Bedienungsanleitung Strong SRT 32HC4043 (Seite 17 von 23) (Englisch)

751358

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

6.0 USB

6.1 Reminder when using the USB player

Some USB storage devices may not be compatible to operate smoothly with this TV.

Back up all of the data in the USB storage device in case data is lost due to an unexpected accident.

STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is

consumer's responsibility.

For large le sizes, the loading speed may be slightly longer.

The recognition speed of a USB storage device may depend on each device.

When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode

otherwise the USB storage device or the les stored in it may be damaged.

Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) le

system provided with the Windows operating system. In case of a storage device formatted as a dierent

utility programme which is not supported by Windows, it may not be recognized.

When using a USB Hard Disk Drive which is not powered independently, ensure its power does not

exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB

Hard Disk and restart the TV system.

An “Unsupported File” message will be displayed if the le format is unsupported or the le is corrupted.

FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.

This TV may not support some multimedia les changed and upgraded as the change of the encoding

format or other technical aspects advances.

Please refer to chapter 9. Appendix for a list of supported le formats for USB playback.

6.2 USB menu

Press SOURCE and select USB. You can view movie, music and photo les from your USB storage devices.

Connect a USB storage device to the USB input terminal and select the types of media on the home

page: Movie, Music, Photo and text. Press OK, the screen will show the connected USB device, press OK

again to view the le folders and les. Press pq or tu to select a folder, press OK to open the folder

and select the les. Highlight the one you want to play or watch or press directly u2 to start playing

directly. Press 3 to stop playing and return to upper lever folder. Continuously press RETURN to go back

to upper level folder. Repeat again to select and play another media type.

NOTE: By choosing one of the three media types, for example Movie, the folders

inside will display only video les and no other formats.

6.2.1 Play movies

Fig.6

During playback, press INFO or OK to display/exit the menu bar (Fig.6). Press the USB control buttons

on the remote control to do relevant operations.

Play & Pause/Stop/Prev./Next

Press u2 to play or pause the playback. Press 3 to stop playing. Press

7 8 to play the previous or the next video le. Press INFO and use tu to

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 32HC4043 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 32HC4043

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info