Bedienungsanleitung Strong SRT 40FB4013N (Seite 20 von 22) (Englisch)

751410

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

6.2.4 Browse text documents

Press t u to select Text in the main menu. Then press t u to select the drive disk you choose to watch

and OK to enter. Select the file you want to display by using pq t u and confirm with OK. Quit step by

pressing OK. Press t u to select return and go back to previous menu.

6.2.5 Software update via USB

From time to time you can check if there is an improved software version available. This can be viewed

and downloaded from our website www.strong.tv. Search the model number on our website's service

support section. If there is an improved software version you can download the file and copy it to the

root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu

on your TV. Afterwards plug your USB device into the USB slot and press OK to update the respective

software. Confirm with Yes using t u. When the update is completed, remove the USB stick, disconnect

your device from the main power supply and plug in again.

7.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for

the problem you are experiencing. If the TV does not work properly after checking it, please contact

your local service line or STRONG dealer. Alternatively you can send a support mail via our website

www.strong.tv.

Problem Possible cause and solution

The LED/Standby indicator

does not light up

1. Check whether the power connector is completely plugged at

the TV and into power socket.

2. Make sure that the switch on multipoint connectors is switched

ON as well.

3. The electrical outlet may be damaged.

4. STBY LED is defective.

No Signal

1. The TV is not connected to a signal source (DVB-C, DVB-S/S2

or DVB-T/T2) or the antenna (terrestrial or satellite antenna)

is maybe not aligned correctly respectively the according

connection and distribution equipment might show

malfunction, incompatibility or defectives.

2. DVB-T/T2: Active antennas need antenna power switched ON or

external power connected.

Antenna is maybe out of digital signal reception in your area.

Check reference from service providers about coverage.

3. DVB-S/S2: Incorrect values of some tuner parameters (e.g. one

or some channel(s) changed to another transponder or are no

longer emitted).

Incorrect values of LNB parameters.

The picture and sound

remain frozen, or macro

blocks or similar distortion

are visible on the screen.

DVB-S/S2,DVB-T/T2: The reception signal is too weak or disturbed by

electromagnetic, high-frequency, or other interference signals. DVB-T/T2 :

Disturbances caused by signal reflections.

DVB-C, DVB-S/S2: The connection cables at the signal source are too long

(too high attenuation).

DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got

misaligned after storm etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 40FB4013N Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 40FB4013N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info