751407
18
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
5.12.1 Enabling or disabling T-Link
Press Menu on the remote control, then select Options > T-Link.
Press t u to select On or Off, if this function is turned on, T-Link option will be available in the Quick
access menu which you can enter by pressing the Option button on the remote control.
5.12.2 Using one-touch play
With one-touch play, pressing the play button on (for example) your DVD remote control starts
playback on your DVD device and automatically switches your TV to the correct source, displaying
DVD content.
5.12.3 Using system standby
With system standby, pressing the q button on (for example) your TV remote control switches your
TV and all connected HDMI devices to standby mode.
NOTE: Guide Menu will be available in the sublist of T-Link option when T-Link
function is turned on and CEC devices are connected. With this function,
you can operate CEC devices with a virtual on-screen controller and the TV
remote control.
NOTE: The CEC functions depend on the devices connected and it is possible that
some devices may not interoperate correctly when connected to this TV.
The user manual or the manufacturer of the problematic devices should be
consulted for further information.
5.13 Common interface
Encrypted digital TV channels can be decoded with a common interface module and a card provided
by a digital TV service operator.
The common interface module may enable several digital services, depending on the operator
and services you choose (for example, pay TV). Contact your digital TV service operator for more
information about services and terms.
5.13.1 Using the common interface module
WARNING: Switch off your TV before inserting a common interface module. Be sure
to follow the instructions described below. Wrong insertion of a common
interface module may damage both the module and your TV.
Following the directions printed on the common interface module, gently insert the module into the
common interface slot on the TV.
Push the module in as far as it will go.
Turn on the TV and wait for the common interface function to be activated. This may take several
minutes.
14
PART 1
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 40FY4002N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info