Bedienungsanleitung Strong SRT 49FX4003 (Seite 19 von 23) (Englisch)

751401

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

4. The recognition speed of a USB storage device may depend on each device.

5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB

mode otherwise the USB storage device or the files stored in it may be damaged.

6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only)

file system provided with the Windows operating system. In case of a storage device formatted

as a different utility programme which is not supported by Windows, it may not be recognized.

7. When using a USB Hard Disk Drive which is not powered independently, ensure its power does

not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must

pull out the USB Hard Disk and restart the TV system.

8. An "Unsupported File" message will be displayed if the file format is unsupported or the file is

corrupted.

9. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.

10. This TV may not support some multimedia files changed and upgraded as the change of the

encoding format or other technical aspects advances.

11. Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.

6.2 USB menu

Press SOURCE and select USB. You can view movie, music and photo files from your

USB storage devices. Connect a USB storage device to the USB input terminal and select the types of

media on the home page: Movie, Music and Photo. Press ENTER, the screen will show the connected USB

device, press ENTER again to view the file folders and files. Press p q to select a folder, press ENTER

to open the folder and select the files, then press ENTER to tick them. Highlight the one you want to

play first, press 1/2 to start playing or select a file and press 1/2 to start playing directly. Press 3 to stop

playing and return to upper lever folder. Continuously press RETURN to go back to upper level folder.

Repeat again to select and play another media type.

NOTE: By choosing one of the three media types, for example Movie, the folders

inside will display only video files and no other formats.

6.2.1 Play movies

Fig. 7

Press INFO to display/exit from the menu bar (Fig. 7). Press the USB control buttons on the remote

control to do relevant operations.

Play & Pause/Stop/Prev./Next

Press 1/2 to play or pause the playback. Press 3 to stop playing. Press

7/8 to play the previous or the next video file. Press INFO and use t u to

highlight the corresponding icon on the control bar, then press ENTER. TV

will response accordingly.

Fast Reverse/Fast Forward Press and hold 5/6 for seconds to draw the playing progress as your desire,

then press 1/2 to start the playing from the new position.

Play Mode Highlight the corresponding icon and press ENTER to switch to another play

mode.

Information Highlight the corresponding icon and press ENTER to view the information of

the playing video.

Go to time Skip to specific point by input time. Highlight the corresponding icon and

press ENTER to open the Input search time screen. Press t u to move the

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 49FX4003 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 49FX4003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info