Bedienungsanleitung Strong SRT 65FX4003 (Seite 14 von 23) (Englisch)

751400

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

4.0 PERSONAL VIDEO RECORDING

Important notes

 For any type of recording with this TV, you must have connected an external device to the

USB port at the back of the TV to record onto.

 The USB device must be FAT32 format.

 When you are using the USB device to record on this TV for the first time, we suggest

formatting the USB device on the TV before you start the recording.

 Make sure you are watching a DTV programme.

 Use a high-quality mobile device to record HD programmes, otherwise the videos will be

jammed during the playback.

 Back up all of the data in the USB storage device in case data was lost due to an unexpected

accident. STRONG assumes no liability for the losses by misuse or malfunction. Data backup is

the responsibility of the consumer.

4.1 Instant one-touch recording and playback

Fig. 6

Insert an external high-speed storage device and make sure the device has enough free space. Select the

TV programme you wish to record. Press 4 to enter into PVR mode and start recording. The PVR control

bar on the screen shows as in Fig. 6, you can select the settings of your choice. If the PVR function cannot

be realized, try to format your USB device. If you wish to stop the recording, press 3 and the recording

will stop.

NOTE:

 During the record mode, you cannot change channels or select another function.

 If the signal is interrupted or removed while in record, the record will stop until the signal is

established. This may cause you to lose programme content.

 Please do not turn the TV OFF during recording. This will make the TV exit the PVR and turn to

standby.

 On some encrypted channels (using CI+ module) the recording mode is blocked by the

broadcaster

4.2 Timer recording

Go to the channel that will broadcast the programme you want to record. Press EPG on your remote

control to bring up the EPG interface. The channel you are watching will be highlighted on the screen

that appears. Press the RED button on the remote control, then enter into the programme details on

the recorder menu by pressing pq to select an item and t u to change the setting. For example, if

the programme starts at 8:30 pm on the same day, enter 30 in the space for MINUTES, 20 in the space

for HOURS (a 24 hour clock applies) and then the relevant date. Use the same method for entering the

finish time. Choose the recording mode: Once, Daily or Weekly. Press ENTER to confirm your selection. A

schedule of all your recordings (the schedule list) will appear. See chapter 4.3.3 for more on the schedule.

The recording will be active also in Standby mode.

NOTE: A recording is possible only if a USB device is connected.

If you are browsing the EPG, follow the steps on the EPG function page.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 65FX4003 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 65FX4003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info