Bedienungsanleitung Strong SRT 65UA6203 (Seite 12 von 23) (Englisch)

751435

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

The installation will proceed to the Internet Connection screen, choose between Setup or Skip and

confirm with OK. If you choose Setup you will be forwarded to the network configuration screen; with

Skip you automatically jump one screen further and you are able to choose the correct time zone.

On the following screen, you can select the Antenna scan type, choose the one you like to use and

follow the on-screen instructions. Select which input source you want to use: DTV to receive digital

terrestrial broadcasts or ATV for analogue terrestrial reception. Other tuners can be set-up if you choose

for to Skip. Select Cable to receive digital or analogue cable broadcasts or Satellite to receive digital

satellite broadcasts (if you have a satellite dish).

3.1 DVB-S2 installation

Satellite Setting

Press the MENU button and select Channel Scan by pressing OK.

Use the pq buttons to go to Tuner Type menu and by pressing pq again in the menu you can select

Satellite, confirm with OK and press BACK to return to the previous menu.

Channel Search

Use the pq buttons to choose Auto Tuning and press OK to confirm. The default setting is ASTRA 19.2.

Use t u if you like to select a different satellite signal and press OK to confirm.

With the pq buttons you can decide which scan options shall be used:

Channel Type Choose between Free & Scramble and Free.

Service Type Select DTV to search DTV channels only, or All for a complete search.

Network Search Network Scan on the selected satellite.

Clear DB Choose between All or OFF if you want to delete channels that were

previously saved during the installation of new channels.

It is recommended to use the default settings. Then select Auto Scan and press OK to proceed. Scanning

a full satellite may take a while to complete.

You have the same possibilities with the DTV - Manual Tuning process.

NOTE: Network Scan: This function allows you to search for the NIT data of the

corresponding satellite to receive newly appeared channels. Please consider

that unlike Astra 19.2 or HOT BIRD 13° some satellites do not offer this

function or only support it partly. If you have any questions, please contact

your dealer or the service/service hotline.

3.2 DVB-T2 installation

Terrestrial Setting

Press MENU and select Channel Scan by pressing OK. First use the pq buttons to enter the Country

menu and select the country you are living in, confirm with OK and return to the previous menu with the

BACK button.

Use the pq buttons again to go to the Tuner Type menu and by pressing pq you can select Antenna,

confirm with OK. The TV will now search for digital channels.

After choosing the Antenna option, go to Auto Tuning and choose between DTV, ATV or both scan

options. Select one and confirm by pressing the OK button; with BACK you return to the previous menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 65UA6203 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 65UA6203

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info