Bedienungsanleitung Strong SRT 7000 (Seite 20 von 25) (Englisch)

480531

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

PART 1 • English

English

7.7 USB

Press MENU and select USB. The menu provides Multimedia feature to playback Music, Photo, Movie and

with the receiver Recorded ﬁles. Supported are different ﬁle formats listed below. In this menu you also

can see information about the total and free space of the connected USB device, make video and photo

conﬁgurations and format the USB device into the receiver accepted format. The unit supports USB

devices with FAT and FAT32 format. Make sure your USB device is appropriate formatted; refer to point

7.7.4 Recording Conﬁgure for more details.

NOTE: STRONG cannot guarantee compatibility (operation and/or bus power) with all USB

mass storage devices and assumes no responsibility for any loss of data that may occur

when connected to this unit.

With large amounts of data, it may take longer for the system to read the contents of a

USB device.

Some USB devices may not be properly recognized. Even when they are in a supported

format, some ﬁles may not play or display depending on the content.

7.7.1 Multimedia

If there is no USB device plugged in, a warning message “No USB Device is Found” will be displayed.

When an USB device is detected you can select between Music, Photo, Movie or Records in this menu.

Select one of them, press OK to enter the ﬁle browser and select the ﬁle you wish to be played.

Music – supported ﬁle formats are MP3 and WMA.

Photo – supported ﬁle formats are JPG and BMP

Movie – supported video ﬁles in various formats (MPG, MPEG, TS, VOB, MP4, AVI,...)*

Records – displays list of recordings.

Music

Select the desired music ﬁle and press OK to start playback.

During playback, the following functions are available:

PLAY (u) or OK: starts playback of the selected ﬁle.

2 to pause/resume playback and 3 to stop it.

5 and 6: to review or forward the playback with x2, x4, x8, x16 and x32 speed. If reviewing reaches the

beginning, it will resume the playback of the current ﬁle, and if forwarding reaches the end, the playback

of the next ﬁle will start.

GOTO: opens a counter banner for entering the desired time moment you want to jump to. Use the 0~9

buttons for entering the time and OK to conﬁrm.

7 and 8: starts playback of the previous/next ﬁle.

REPEAT: Press once for single ﬁle repeat, twice to repeat all ﬁles or triple for random playing. The symbol

for selected repeat mode will appear at the top of the screen. Press once again to return to common

play mode.

RECALL: goes to the up folder.

EXIT: to get back to the Multimedia menu. Press EXIT once more if want to leave the Multimedia menu.

TIP: Playback of music will continue as long as the Multimedia menu is active. This allows

you to listen to music while watching photos. Just exit of the Music submenu and select

desired slide mode in the Photo submenu like explained below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7000 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info