Bedienungsanleitung Strong SRT 7002 (Seite 19 von 27) (Englisch)

480574

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

PART 1 • English

Edit transponder: Press GREEN to edit the highlighted transponder. In the pop-up banner, change

the transponder´s data by using the navigation and numeric buttons. Conﬁrm

changes with OK or cancel with EXIT.

Delete transponder: Press YELLOW to delete the highlighted transponder. Press OK to conﬁrm or

EXIT to cancel.

7.3.2 DB Management

This menu allows you to save and reload the channel data base of your receiver from/to a USB-device.

This very convenient feature enables you to save your personal settings like Channel-, Favourite-, Sat-

and TP-lists on an USB storage device and load them back to the receiver later. This feature is especially

helpful after unintentional changes or factory reset. In such cases just skip the First Installation by

pressing EXIT in First Installation and select the DB management menu.

Connect the USB storage device to you receiver and select one of the options:

7.3.2.1 Load from USB

Press OK for displaying the list with available DB ﬁles (if any stored before). The DB ﬁles „STRONG_S2_

Database_TT_MM.DBM“ are shown with their built date (day and month). Select the DB ﬁle you want to

load and conﬁrm it with OK. When the DB has been loaded successfully (message appears on screen)

the receiver will switch automatically to the ﬁrst stored channel and show its content in the background.

Press EXIT until the OSD menu disappears.

7.3.2.2 Backup to USB

Press OK to make a backup of the data base. A DBM-File „STRONG_S2_Database_TT_MM.DBM“, with

the current date (day and month), will be created on the USB-Device. When the DB has been stored

successfully a message will be displayed on screen. Press EXIT until the OSD menu disappears.

7.4 Time and date settings

Press MENU and select Time. The menu provides options to adjust the time and date settings.

Press pq to select an option and tu to adjust the setting. Press EXIT to exit the menu.

Time Auto: Select On for automatic time and date updates from live signal or Off for

entering them manually.

Time Zone: Select the Offset from GMT standard time.

Summer Time: Select On or Off depending on the year’s period.

Date: Enter the date when Time Auto is set to Off.

Time: Enter the time when Time Auto is set to Off.

7.4.1 Timer (Schedule)

In this menu you can setup the schedule for automatic switching to the deﬁned channels at a particular

date/time. The timer menu can be entered directly from viewing mode by pressing the BLUE button.

Add: Press RED to add a new booking. In the appearing dialog, select channel type

and number, the starting date and time, end time, repeat cycle (once, daily or

weekly). for selecting the channel number you can use the tu or the numeric

buttons but also the fast channel ﬁnd option (RED). It allows you to enter the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7002 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info