751646
19
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
15
3. 576i: for PAL system TV.
4. 576p: for PAL system TV.
5. 720p: for NTSC or PAL system TV.
6. 1080i: for NTSC or PAL system TV.
7. 1080p: for NTSC or PAL system TV.
TIP You can change the video resolution directly from viewing mode by
pressing the GREEN button on the remote control.
TV Format
Set the standard corresponding to your TV set. Available options are: PAL and NTSC.
Video Output
This setting is only relevant when the receiver is connected to the TV set via Scart. Select RGB for the
best picture quality or CVBS if your TV doesn’t support RGB.
7.3 Channel Search
To access the menu press MENU and select Channel Search. It contains two options: Dish setup and
DB (Data Base) Management. Select an option and press OK to enter it. Press to exit the menu.
7.3.1 Installation
7.3.1.1 Dish setup
Use p/q to highlight the satellite your dish is aimed at. Its antenna settings will be shown at the
right side. You can enter the right side with the tu buttons and return to the satellite list with .
7.3.1.2 Congure the antenna settings for the selected satellite
LNB Type: Press tu or OK to show the list of LNB Types. The Universal LNB
(09750/10600 MHz) is supported – the most used on the market. SatCR A
and SatCR B are used for SatCR systems. If only 1 SatCR LNB is connected,
use SatCR A. SatCR systems are mainly installed by professional experts. An
optional satellite splitter is required for multi-users.
LNB Power: Use tu to set the LNB power. 13/18V is the setting for a Universal LNB.
22KHz: Use tu to switch the 22KHz oscillator signal on or o. Auto is the setting for
a Universal LNB.
DiSEqC1.0: To select the correct port from up to 4 (if available) for the corresponding
LNB.
DiSEqC1.1: To select the correct port from up to 16 (if available) for the corresponding
LNB.
Motor: If using a motor driven dish, press tu to choose between DiSEqC1.2 and
DiSEqC 1.3 depending on the motor type you use.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

strong-srt-7007

Suche zurücksetzen

  • Ich kann WDR 3 nicht finden ist auf einem anderen Kanal Eingereicht am 9-1-2023 14:15

    Antworten Frage melden
  • wie kann ich ard und zdf finden.nach dem senderdurchlauf nicht erschienen.. Eingereicht am 30-11-2022 13:20

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 7007 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 7007

Strong SRT 7007 Bedienungsanleitung - Deutsch - 40 seiten

Strong SRT 7007 Bedienungsanleitung - Französisch - 32 seiten

Strong SRT 7007 Bedienungsanleitung - Spanisch - 35 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info