Bedienungsanleitung Strong SRT 7502 (Seite 12 von 32) (Englisch)

751652

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

3.3 Connecting to your motorised dish via DiSEqC 1.2 or GOTO-X

Fig.8

Another possibility for watching programmes from multiple satellites is by mounting a dish to a

motorized DiSEqC 1.2or GOTO-X positioner. For the correct setup and mounting of your motorised dish

we recommend referring to the advice of a professional satellite equipment installer to ensure correct

alignment and function. Please ensure that all connections are tting well and are correctly assembled,

then you only need to connect the “OUT” connector of your positioner to the SAT IN connector on the

rear side of your receiver.

3.4 Extended connections for your home entertainment

Fig.9

a. Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver

and the other end to the coaxial audio input of your home theatre set, amplier or any other

device supporting digital audio.

b. Connect your USB 2.0storage device to this connector by using a good quality USB cable or

insert the device directly.

4.0 STARTING UP FOR THE FIRST TIME

Ensure that your satellite signal is of good quality and that all connections are properly setup. In case you

encounter diculties or you have questions, please ask your local dealer for assistance.

It is recommended to follow the First Time Installation step by step. It will guide you through the basic

setup and installation process. You will enjoy digital HD broadcasts within just a few minutes.

In the unusual/uncommon case that the receiver should not start-up within the First Time Installation,

please reset the receiver with the factory reset DEFAULT PIN: 0000).

Please insert your valid and activated Irdeto smartcard for proper reception of the channel bouquet of

your choice.

4.1 Language (Step 1)

After connecting your receiver for the rst time, the Welcome 1st Step: Language menu will be shown on

screen. First, choose your preferred language by using pq. After selecting, conrm by pressing OK to

go to Step 2.

4.2 Audio and Subtitle Setup (Step 2)

In this next step Welcome 2nd Step: A/V Output Settings menu you can choose your preferred audio

language and TV screen settings. If you are satised with the default settings just proceed by pressing

OK at the selection Next.

Aspect Ratio Select the TV screen you are using. The options are 16:9 and 4:3.

Aspect Conversion Select conversion for the TV screen if needed. The options are Pan&Scan,

Letterbox, Pillar or Full screen.

First Audio Language Select the main audio track language which you prefer to hear as rst choice.

Either press OK for a list with all available languages or use tu to select a

language.

Second Audio Language Select the second audio track language which you prefer to hear if the rst

choice not is available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7502 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info