Bedienungsanleitung Strong SRT 7510 (Seite 14 von 32) (Englisch)

751653

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

5.0 QUICK GUIDE TO USING YOUR RECEIVER

We at STRONG understand that you eagerly anticipate enjoying your new HD receiver. We do, however,

recommend reading the full manual to get the best performance of your STRONG HD receiver.

To switch your receiver ON or to Standby, use the q button on the remote control. Choose a channel

with pq or the CH+/CH buttons. Alternatively, you can choose the channel number with the 0~9

buttons on the remote control or press OK in viewing mode to display the channel list. The volume

can be adjusted with t u or the VOL+/VOL buttons. The usage of VOL+/VOL and ! is possible

in ALL menus which present a TV picture in the background and can be used in the videotext mode

additionally. P+/P enables you to scroll page wise in all lists, which allows you to select channels or

other items as conveniently as possible.

To open the channel and programme* information, press the INFO button in viewing mode. In this state

it is possible to use t u to display channel and programme information about other channels without

switching channels, but however in this mode you can also switch to the selected channel by pressing

OK. Press INFO twice to display detailed programme information of the current or next programme.

For the current programme information use t u to change between the current and next event

information. In the respective programme information you can use P+/P to scroll if applicable. If you

press the button a third time, technical details of this channel will be displayed. Press INFO or  to close

the information.

* Programme information are displayed in case of availability. Availability depends on the broadcast.

NOTE: 5 min after switching the receiver into Standby it will enter the deep sleep

mode. Within this time the receiver is able to start up quickly. Starting up

from deep sleep takes approx. 35 seconds.

6.0 OPERATION

In viewing mode, several features are available to make watching TV a true pleasure. This chapter

describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver.

6.1 Changing channels

Your new receiver is equipped with three ways to change channels.

1. Via direct access

2. Via the channel list

3. Via the CH+/CH or pq buttons

4. Via using the 9 button

6.1.1 Direct access

To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the remote

control. Channel numbers can be up to four digits long. Entering a number with less than four digits is

possible. After entering the channel number just wait a few seconds or press OK and your receiver will

switch to the selected channel.

NOTE: When using the simpliTV List some channel numbers may not be assigned

or present in the list. Channels which have been searched manually or been

added personally (e.g. when you had installed another list before installing

the simpliTV List) will be assigned from channel number 400 onwards.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7510 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info