Bedienungsanleitung Strong SRT 7510 (Seite 19 von 32) (Englisch)

751653

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

USALS selection

Configure the motor position by using the USALS function. Enter your geographic location. The motor

is able to calculate all available satellite positions, preconditioned this function is also supported by the

motor. Use pq to select the Antenna Position sub-menu.

Antenna position: Press OK to open the submenu. Use the 0 ~ 9 buttons to enter the degree of

longitude. Next, select East or West, then 0 ~ 9 to enter the latitude. Finally,

specify North or South. Finally, select Save and press OK to confirm your

entries.

Go to position Press OK to move the motor to the desired satellite position. After

computation, you can also select other satellites, go to Satellite and select the

desired one from the list.

NOTE: For detailed information about correct geographic values of your location,

visit websites such as dishpointer.com, itouchmap.com, or other reliable

sources such as professional journals.

7.1.3 Channel Search

In this menu, you can perform an automatic, network or transponder search. You can also search for

channels on all installed satellites. Use the pq buttons to highlight the desired item and use t u to

change the settings.

Satellite: Here you will find a list of satellites, only select a satellite/s which is available in

your installation or have been configured previously.

If this option is marked, the name and position can be changed using the

RED Rename Satellite button. To do this use pq and t u, on the shown

keyboard, to navigate.

Transponder: Use the t u buttons to switch between the transponders of the selected

satellite. You can also press OK to list them. Use pq or P+/P to scroll

through the list. Confirm your selection with OK. Press the RED button to Edit

TP, the GREEN to Add TP or YELLOW to Delete Current TP. Details can be found

in chapter 7.1.3.1 Edit, add or delete transponders

Channel type Use t u to select the channels you'd like to search for: All, only Free-to-air or

Encrypted channels.

Scan mode TV & Radio searches for TV and radio channels, TV only for TV channels and

radio only for radio channels.

Search for Use t u to select the search type to be performed. You can choose between

the following options:

One Satellite: Searching on the selected satellite.

Selected Satellites: Search for all installed satellites. * This option displays a menu for selecting

the installed satellites. After selection, please use the RED Search key to

continue the search.

NIT Table: NIT Scan on the selected satellite.

simpliTV List: With this option you can install the simpliTV list at a later stage. In this case,

previously installed or available channels are kept and will be integrated in

the simpliTV list. TV or radio channels which are not included in the simpliTV

list are listed starting with channel number 400 and cannot be edited. The

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7510 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info