Bedienungsanleitung Strong SRT 7510 (Seite 22 von 32) (Englisch)

751653

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

and press the YELLOW Move button. The channels will be inserted below the

selected position.

Create Favourite Lists

Select FAV and press OK to create favourite lists. On the left, below the TV picture, the groups, which are

available, will be displayed. Use pq to select a group. If you press OK, a keyboard appears and you can

rename the group. Within the keyboard use the pq and t u buttons to navigate and OK to enter the

desired character/number. Use RED to delete the existing name and GREEN to switch between capital

and small letters. Use P+/P to switch to the special characters.

Once finished, select Save and press OK. Then go to the right via u button, where your usual program

list is displayed. Use FAV to add a channel to the selected favourite list and press OK to switch to this

channel. When you go to the centre, you can use FAV to remove the selected channel from this favourite

list (only from the FAV list). You can also activate the hi function by the YELLOW button. A hi will

appear next to the channel. Now move it to the desired position by using pq and confirm the new

position by pressing the YELLOW button again. In this case, channels can only be moved one by one.

To exit from a menu, press either  to go back one step, or MENU to go directly to TV mode. When you

exit the menu by /MENU, you will be asked to confirm the changes. This is applicable for all changes

you made.

NOTE: The simpliTV list contains channels in the sequence and numbering of the

broadcaster. Added/additional channels which are not included in the list

are listed from channel number 400 and cannot be edited. The channels

can be edited in My TV List, see chapter 7.2.1 TV Channel Manager

7.2.2 Radio Channel Manager

Please refer to the previous chapter TV Channel Manager to find out how it works in radio mode. The only

difference is that no picture is available.

7.2.3 EPG (Electronic Programme Guide)

For details on the EPG please refer to chapter 6.7 EPG (Electronic Programme Guide).

7.2.4 Parental Control

In this menu, you can make a PIN-Code Change, set a Menu lock and Program Lock Age.

To enter this menu, you need to enter the PIN-Code (DEFAULT PIN: 0000) first. Use the pq buttons to

select the desired setting or press OK to list the options. Use the t u buttons to change the setting.

Menu lock: Use t u to select ON or OFF, depending on whether you want to use this

function. It allows you to block access to the sender management and the

complete installation menu.

Program Lock Age: Use t u to choose between the following settings: Off, 12 years, 14 years

16 years or 18 years. As soon as you switch to channels which support child

protection or EPG-based age restrictions, you must enter your PIN-Code

according to your settings.

PIN-Code Change: Press OK to open the options listed below.

Old PIN-Code: Use 0 ~ 9 to enter the old PIN-Code.

New PIN-Code: Use 0 ~ 9 to enter the new PIN-Code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7510 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info