Bedienungsanleitung Strong SRT 7806 (Seite 20 von 30) (Englisch)

751654

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Other options available for conversion of 16:9 video format:

4:3 TV Pan&Scan Displays full screen and high size, but the left and right sides of the screen are cut.

Combined Cuts left and right sides of screen to a minor extent and displays black horizontal bars

at upper and lower parts.

SCART Output: This setting is only relevant when the receiver is connected to the TV set via SCART.

Select RGB for the best picture quality or CVBS if your TV does not support RGB.

HDCP: Available options: On or Off, please see the note below.

NOTE: HDCP (High Definition Content Protection) is set to On to default as nowadays all

TV sets with an HDMI connector support HDCP. If you face problems with the HDMI

connection, you can deactivate HDCP, which allows watching via HDMI without

problems. Please consider that movies which are broadcasted with an extra content

protection might not be shown when HDCP is set to Off.

HDMI Audio Output:

Adjust this setting in accordance to the connected audio equipment. Set to Auto for

the most common connections. Set the BitStream option to bypass original audio

bitstream through HDMI to a connected audio equipment which can decode complex

digital audio formats. Set the PCM option to convert complex digital audio formats

supported by the receiver to STEREO audio and pass it to the HDMI output.

SPDIF Audio Output:

Adjust this setting in accordance to the connected audio equipment.

Set the BitStream option to bypass original audio bitstream through S/PDIF to a

connected audio equipment that can decode complex digital audio formats. Set the

PCM option to convert complex digital audio formats supported by the receiver to

STEREO audio and pass it to the S/PDIF output.

OSD Transparency:

Define the transparency of menus and other system information windows. Available

options: Not transparent, 10, 20, ... 50.

Banner Time Out: Define the duration of the info banner display in the viewing mode. Available options:

3 Seconds, 5 Seconds, 7 Seconds and 10 Seconds.

Audio Description: Set this function to On if you want to enable the playback of the audio description: a

narrator will describe what is happening on the screen for blind or visually impaired

viewers

AD Volume Offset: Define the difference between the normal TV broadcast sound and the Audio

description volume.

7.2.3 PIN Code Management

This submenu allows you to control the blocking of certain programmes from unrestricted viewing,

access to certain menu options and usage of the EPG based on parental rating system if supported by

the local broadcast.

Before entering this submenu, you have to enter the correct PIN code. The default value is 0000.

Programme Lock: Select Off or On. The default value is Off. If you select On, you cannot view the locked

channel in the TV Manager submenu without the correct password.

Programme Lock age:

Activates the parental control rate setting.

Available options: All Blocked, 4 years old, 5 years old, …, 18 years old, Disable (default

value).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7806 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info